Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

Sell OSRS Gold
Sign in to follow this  
Turninprofut

Proxy username and password? Is anyone using Blazing Proxies?

Recommended Posts

I'm using Blazing Proxy, mainly just to learn about this stuff, and when attempting to use the username/password login on the tribot client I am given a pop up window that says the connection has timed out.

Yet if I try to authenticate via IP I do not have the user/pass that Tribot uses. 

 

What am I doing wrong? Is anyone using Blazing Proxies that could share their settings?

 

Or any other solutions/tips would be greatly appreciated, thank you!

proxypic.png

Share this post


Link to post
Share on other sites
Array
7 hours ago, YoHoJo said:

Make sure you're using them as SOCKS proxies, and use port 1080.
There may be no user/pass in this case, and just need your whitelist your IP on Blazing.

Well, first off you have popped up on pretty much every thread I've been searching through- so thanks for being such a helpful legend. But, it didn't work without the password either when I had it switched to SOCKS. Nor did it work with pass/user when all the info was correct.

Fortunately I was still on the trial so I haven't given them any money, and I've found a better working site to boot, but it is a shame I can't figure this one out.

Edited by Turninprofut

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By CrudeCorrosionWatcher
      I'm having difficulties connecting my bots through my proxies.  I've confirmed that the proxies themselves are working by connecting directly through them in my LAN settings on windows, and then visiting WhatsMyIP.  Using the LAN settings method I'm also able to load TRiBot and load a client.  When I try loading Tribot normally without proxies, it loads,and launching clients without proxies works.  If I try launching tribot OR a client with the same proxies I had confirmed working, I get a timeout in the former case and a perpetual "Loading client params" in the latter.
      Has anybody else experienced anything similar and is there something obvious I'm overlooking? Thank you for your input
      tribot_error.txt
    • By jerrycan314
      when i open a tribot client it crashes and i get this error :c

      #
      # A fatal error has been detected by the Java Runtime Environment:
      #
      #  EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7a0e3d9d, pid=1608, tid=0x00000e54
      #
      # JRE version: Java(TM) SE Runtime Environment (8.0_251-b08) (build 1.8.0_251-b08)
      # Java VM: Java HotSpot(TM) Client VM (25.251-b08 mixed mode windows-x86 )
      # Problematic frame:
      # C  [atiglpxx.dll+0x3d9d]
      #
    • By Heroinkid
      Hi I got a proxy server from Virmach. I cannot seem to get Tribot to connect to it. I have gotten a 3rd party internet browser called Maxthus to get it to work so I don't think that its the server that's not working. Yes I have VIP-E as well. Please help thanks!

    • By QNDLF
      Has been fine for the past few days however doesn't work today, have deleted the full .jar file and redownloaded again and it has the same problem
       
      Any ideas how to fix it? 
       

    • By reese33
      looking for site that sells unflagged / no prior use proxies 
       
      preferably cheap
       
      if someone has commented already a site, please comment the one you use/know of (if willing to share)!
       
      thanks, 
      reese
    • By tomking50
      Hello, 
      I've just purchased this bot and im wondering how do i set breaks to avoid bans?
       
      Thank you,   
    • By nidus
      For example:  if I bought a single socks5 proxy from https://www.yourprivateproxy.com/, would it be able to proxy say 8 Tribot tabs if they all ran the same script?
    • By will6100
      I really love the process of developing a script, testing it, debugging it, etc.. So after writing my first really simple script that would tan hides, I got my first botting account banned, which is something I knew was gonna happen since my lack of scripting knowledge. Im ready to get a new one up and going and continue to develop more basic scripts to sharpen my scripting skills. Im sharing my first script here and looking to hear what I should do and should not do. Also get some tips on what to look for to reduce the banning rates of my testing accounts. The account I was using was only combat lvl 5 and didnt have any quests done, I guess that didnt help too? I was also about to introduce ABC2 into the script and learn how to use it but my account got banned right before I could implement it. So looking forward to hear your criticisms about my script and tips to not get the script bannable. Also have in mind I didnt really refactor anything, some parts may look ugly, beware!
      package scripts; import org.tribot.api.DynamicClicking; import org.tribot.api.General; import org.tribot.api.Timing; import org.tribot.api.input.Mouse; import org.tribot.api2007.*; import org.tribot.api2007.types.RSNPC; import org.tribot.api2007.types.RSObject; import org.tribot.api2007.types.RSTile; import org.tribot.api2007.util.ThreadSettings; import org.tribot.script.Script; import org.tribot.script.ScriptManifest; import java.awt.*; import java.util.function.BooleanSupplier; @ScriptManifest(category = "Moneymaking", authors = "will6100" , name = "Tanner") public class Tanner extends Script { private final static int BLACK_DHIDE_ID = 1747; private final static int TANNED_LEATHER_ID = 2509; private final static int ELLIS_ID = 3231; private final static int BANK_BOOTH_ID = 10355; private final static int COINS_ID = 995; private boolean isBankable() { RSObject[] booths = Objects.findNearest(100, BANK_BOOTH_ID); if (booths.length > 1) { return booths[0].isOnScreen(); } return false; } private boolean coinsCheck() { if (Inventory.find(COINS_ID).length < 1) { if (Banking.find(COINS_ID).length > 0) { if (!Inventory.isFull()) { return Banking.withdraw(0, COINS_ID); } else { if (Inventory.find(BLACK_DHIDE_ID).length > 0) { return Banking.deposit(1, BLACK_DHIDE_ID); } else if (Inventory.find(TANNED_LEATHER_ID).length > 0){ return Banking.depositAll() > 0; } } } } else { return true; } return false; } private boolean bank() { if (!openBank()) { General.println("Couldnt open bank"); return false; } if (!coinsCheck()) { General.println("No more gold"); return false; } if (!setupInventory()) { General.println("No more hides"); return false; } sleep(100,1000); return true; } private boolean setupInventory() { if (Inventory.find(TANNED_LEATHER_ID).length > 0) { sleep(50,1000); if (Banking.deposit(0,TANNED_LEATHER_ID)) { if (Banking.find(BLACK_DHIDE_ID).length > 0){ sleep(50,1000); Banking.withdraw(0, BLACK_DHIDE_ID); return Timing.waitCondition(this::readyToTan, General.random(3000,5000)); } } } else if (Inventory.find(TANNED_LEATHER_ID).length < 1) { sleep(50,1000); if (Banking.find(BLACK_DHIDE_ID).length > 0){ Banking.withdraw(0, BLACK_DHIDE_ID); return Timing.waitCondition(this::readyToTan, General.random(3000,5000)); } } return false; } private boolean openBank() { if (!Banking.isBankScreenOpen()) { if (!isBankable()){ if(!walkToDestCondition(this::isBankable)) { return false; } } return clickBankBooth(); } return true; } private boolean clickBankBooth() { RSObject[] bankBooths = Objects.findNearest(40, BANK_BOOTH_ID); RSObject booth; if(bankBooths.length > 1) { do { sleep(50); booth = bankBooths[General.random(0, bankBooths.length - 2)]; } while (!booth.isOnScreen() && !booth.isClickable()); booth.hover(); if (isHoverRendered(Mouse.getPos())){ Mouse.click(1); }else { clickBankBooth(); } return Timing.waitCondition(Banking::isBankScreenOpen, General.random(25000,27000)); } return false; } private boolean isHoverRendered (Point toHover) { return !Screen.getColorAt(Mouse.getPos()).equals(new Color(0, 0, 0)); } private boolean isTannable() { RSNPC[] ellis = NPCs.find(ELLIS_ID); if (ellis.length < 1) { return false; } else if (isTanningWindowOpen()){ return true; } return ellis[0].isOnScreen(); } private boolean tanLeather() { RSNPC ellis; if (isTannable()) { sleep(100,200); ellis = NPCs.find(ELLIS_ID)[0]; while (!isTanningWindowOpen()) { Mouse.setSpeed(190); sleep(300,500); if (DynamicClicking.clickRSNPC(ellis,"Trade " + ellis.getName())){ Mouse.setSpeed(115); Timing.waitCondition(this::isTanningWindowOpen, General.random(15000, 17000)); sleep(200,500); Interfaces.get(324,107).click("Tan all"); return Timing.waitCondition(() -> !isTanningWindowOpen(), General.random(3000,5000)); } } } else { return walkToDestCondition(this::isTannable); } return false; } private boolean walkToDestCondition(BooleanSupplier waitCondition) { Walking.blindWalkTo(new RSTile(3278 + General.random(-2,2), 3180 + General.random(-1, 1))); return Timing.waitCondition(waitCondition, General.random(11000,12000)); } private boolean isTanningWindowOpen() { return Interfaces.isInterfaceValid(324); } private boolean readyToTan() { return Inventory.find(BLACK_DHIDE_ID).length > 0 && Inventory.find(COINS_ID).length > 0 ; } @Override public void run() { Mouse.setSpeed(115); ThreadSettings ts = new ThreadSettings(); ts.setClickingAPIUseDynamic(true); while (true) { sleep(50); if (isTannable()) { if (readyToTan()) { if(!tanLeather()){ General.println("1"); break; } } else { if(!bank()) { General.println("2"); break; } } } else if (isBankable()) { if (readyToTan()) { if(!tanLeather()){ General.println("3"); break; } } else { if(!bank()) { General.println("4"); break; } } } else if (readyToTan()) { if(!tanLeather()){ General.println("5"); break; } } else { if(!bank()) { General.println("6"); break; } } } } }  
  • Our picks

    • Over the past few months, I’ve been working diligently on a new project - TRiBot X. Everything has been written from the ground up, with all of the best practices of software engineering. Every aspect of TRiBot has been re-imagined to support three main goals: flexibility, useability, and reliability.
        • Like
      • 50 replies
    • Come give us feedback on the next version of TRiBot!
        • Thanks
        • Like
      • 86 replies
    • TRiBot is looking to improve a lot of its customer relationship management, customer on boarding process, customer experience, design elements, community engagement and pretty much everything else you can imagine when it comes to marketing.

      Our goal: To ensure that the marketing done TRULY reflects the experience and does not shine an inaccurate light on what TRiBot is lacking in.

      So I ask, what do you love about TRiBot and what do you hate about TRiBot? What does O S Bot, Rune M8, PowR Bot and Dre amBot do better? (yes I purposely didn't spell it right 😂).

      Love, 

      RileyZ
        • Like
      • 25 replies
    • Over the last three weeks, I've been working on upgrading our server infrastructure. It's finally ready and is now live!

      Why?

      Increased reliability - less server errors


      Increased availability - less downtime


      Increased security - keeping us and you secure


      Increased capacity - ability to serve you better


      Increased speed - less waiting for things to load


      Faster development - server and service updates will come faster


      What are the changes?

      Move from a single AWS EC2 instance to AWS ECS (Elastic Container Service)


      Distributed computing


      Load balancing


      Git management of server files and filesystem


      Redis caching


      How?

      AWS ECS (with 10 EC2 instances)


      AWS ElastiCache (Redis)


      AWS Load Balancing


      AWS EFS (Elastic file system)


      Please bare with us as I continue to tune the server for maximum performance. Slow loading speeds may occur temporarily. I thank everyone for their patience.

      Please post on this thread if you experience any issues other than slow loading times.
        • Like
      • 51 replies
    • This release will:

      Fix prayers and world hopper API (Thanks @JoeDezzy1 and @erickho123)


      Improve banking API (Thanks @Encoded)


      Adds methods for returning and using Java Lists, rather than arrays


      Slightly randomizes some hardcoded behaviour


      Removes sleeps from waitConditions; the efficiency saving potential is negligible in these use-cases, therefore cleaner code is preferable


      Other back-end improvements





      Note: If you are using LG, please restart both the RS client and TRiBot.
        • Sad
        • Haha
        • Thanks
        • Like
      • 90 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...