Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

Sell OSRS Gold

Recommended Posts

Array
On 5/20/2018 at 11:16 PM, osrsfun1919 said:

Todd, who is badged as an Admin, said it in post #1 of the last downtime.

"Like always if the fix takes longer than 24 hours we will provide compensation."

Please send us a message on the help desk and we'll get to it.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Flax
      Debian 7.0 VPS Setup Guide for TRiBot Botting. 
      By: Flax
       
      Hey guys today I'm going to show you how to setup a VPS for TRiBot botting, I'm making it because I got so many questions from people about this & most VPS guides here are pretty outdated.
      Make sure your VPS operating system is Debian 7 32 or 64bit, or else this guide will not work for you!
      Okay, let's begin.
       
      First off you'll need these programs:
      - PuTTy
      - TightVNC Viewer
      Once you've downloaded those files we can begin setting up your VPS.
       
      Step 1: Open PuTTy and enter your IP and click connect (You should keep the port 22)

       
      Step 2: Now a command prompt will pop up and it'll ask you for a username, Type ' root ' and after that it'll ask you for a password, type in the password that was given to you by your VPS provider.
       
      Step 3: Now you should enter the following commands one-by-one, it can take awhile to install depending on the speed:
      apt-get update apt-get install curl curl https://dl.dropboxusercontent.com/s/jabcbltmn5fuevx/install.sh | sh apt-get install iceweasel Step 4: After that's done you should be able to connect with the VPS through TightVNC.
      REMEMBER: MAKE SURE TO ADD :1 BEHIND THE IP.

       
      This is how it should look:
      Once connected, you can download TRiBot/OSBuddy via the Iceweasel browser(similiar to Firefox).
       
      If you're unable to open TRiBot, try this:
       
      Looking for cheap VPS deals and don't know where to look? Check out Lowendbox, FinalHosting
    • By TRiLeZ
      This release will:
      Add LG support for Runelite Fix NPCChat issues (Thanks @JoeDezzy1) Fix a bug where the camera angle setter would just hold down a key for 5 seconds (the timeout) (Thanks @wastedbro) Slightly adjust the rotation via keys to be more accurate (Thanks @wastedbro) Add the ability for asynchronous camera movement via keys (Thanks @wastedbro) Make Camera rotation via mouse more fluid, with more antiban, and work much better in resizable mode (Thanks @wastedbro) Add a "Camera#setCamera" method, allowing the rotation and angle to be set in parallel (Thanks @wastedbro) Increase the likelihood of using the mouse for camera movements (Thanks @wastedbro) Add support for adjusting the camera to positionable entities (Positionable#adjustCameraTo) (Thanks @wastedbro) Edit: Fix NPEs in Camera API (Thanks @wastedbro) Edit: Fix Login API where it wouldn't detect many messages (Thanks @JoeDezzy1) Edit: Add "Print Break Handler Stack Trace" feature Upcoming updates:
      Improved CLI support Much more Note: If you are using LG, please restart both the RS client and TRiBot
    • By TRiLeZ
      This release will:
      Fix key event handling issue Fix other event handling issue Fix RSServer hook Update world hopper to have it use OCR, thanks to Todd Use proper disposal of old Graphics objects Reformat code Rearrange code Organize code imports Apply around 8000 automated code refactorings Make preparations for Java 9 Fix 11 various bugs Add more reliable debugging support Fix mouseEntered/Exited event dispatching bug Fix minimap walking bug where it opens the map Fix broken hooks for today's game update Fixed https://gitlab.com/trilez-software/tribot/TRiBot-Issues/issues/10
    • By TRiLeZ
      This update (9.312_3) will:
      Fix GE inventory item positioning bug Fix broken object hooks Release 9.312_5 will:
      Fix newly introduced bank inventory item positioning bug Remove some item area offsets to prevent detection of a narrowed down clicking area Fix LG object hooks
    • By TRiLeZ
      This release will:
      Fix some ClosedChannelException bug Fix bug in RSObject#getAllTiles Add game tab support for "Kourend Favour"
    • By Fluffee
      How to Run Most Applications Through a Proxy on both Windows and Linux
      Windows Instructions
      Note: Chrome and Firefox portable do not work with WideCap.
      1. Download WideCap from here (http://widecap.ru/en/download/)
      2. Run through the installer, and launch WideCap, you should see this screen.

      3.Go ahead and click on Settings (First option under the Widecap section on the left hand side). Then uncheck the box that says Run with system startup.

      4. Now go ahead and click on New proxy (First option under the proxies section on the left hand side).
      5.You should see this screen, in the top field enter the IP address and port (IP:Port format). Confirm that the protocol is set to SOCKS v5 (which is the default), and tick the box for Authentication if necessary. If using an authenticated proxy, enter your username in the login field, and obviously your password in the password field. Then hit the Create New button, next to Chain, and type in a name for your Proxy, then Hit OK

      6. Now that you're back to the main screen, click on the Proxy List section (Second option under the proxies section on the left hand side). Right click on your newly added proxy, and click check selected, to make sure you entered all the information correctly. If the status field rolls over to OK, you're good to go, and can move on to the next step

      7. Find WideCap in your System tray, right click, and uncheck the box that says Enable Widecap.

      8. Click on View Programs (Second option under the Programs section on the left hand side). Then drag and drop the icon for the application you want to proxify (run behind a proxy) into WideCap. WideCap supports the proxifying of both .exe and .jar files!

      9. Right Click on your newly added program, and click on Modify Application, you should see a similar screen depending on what you added. Then click on Create New... (to create a new rule)

      10. In the Chain tab, select the Proxy Chain you created earlier, then under the Main tab, give your new rule a name and hit OK. Then Hit OK again on the modify Application screen.

      11. Hit Apply and OK in the main window of WideCap, and then find it in your System Tray again, but this time click the box to Enable Widecap
      12.Open your Proxified application, and check to see if the proxy worked! If your IP is changed, congrats, you've got WideCap working!
      Linux Instructions (Based off of a Debian Installation)
      1. Open a new terminal and run this command
      sudo apt-get update && sudo apt-get install -y proxychains 2. Now that proxychains is installed, we're going to go ahead and create a user specific configuration file. To do this, we'll make a directory, then copy the standard proxychains configuration file to it and change the ownership of the configuration file to your user. Run the command below as your user.
      mkdir ~/.proxychains/ && cp /etc/proxychains.conf ~/.proxychains/proxychains.conf && sudo chown ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.conf && sudo chgrp ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.confroxychains.conf 3. Once the command is finished, open the proxychains config file in your favorite Linux text editor, for ease of use, I'm going to use nano. To install nano run this command
      sudo apt-get install -y nano To edit the proxychains config file, with nano, run this command
      nano ~/.proxychains/proxychains.conf 4. Now, what you'll want to do is scroll all the way down to the bottom, and you should see something like this

      That last line that says
      socks4    127.0.0.1    9050
      That's the line we'll be editing. Firstly, we'll go ahead and erase everything on that line, don't worry we'll put it back. The format for the configuration file is
      Proxy Type(lowercase) (tab) IP address (tab) Port (tab) Username (tab) Password
      Therefore if your proxy was a Socks5 proxy, with an IP of 192.168.1.1, a port of 1080, a username of Fluffee and a password of TRiBot, your final line would look like this:
      socks5    192.168.1.1    1080    Fluffee    TRiBot
      So, go ahead and modify your last line to fit your own proxy and then hit Control+X to exit, and then hit Y to save (instructions are based off of using nano to edit the file).
      5. Proxychains is now setup, but how do you use it? Go ahead and VNC into your Server and open a terminal, or open a Terminal inside your Desktop Environment (if using Linux installed on a PC). From there run the command proxychains followed by the application you would like to run, or the path to the application. For example, try running, if you have Firefox installed:
      proxychains firefox Then navigate to an IP checking website, and see if your proxy worked!
      That concludes the tutorial on how to use a proxy with Oldschool or any browser, on both Linux and Windows. If you have any questions feel free to post in the comments!
    • By TRiLeZ
      This release will:
      Fix resizable mode detection Fix logout with resizable mode Deprecate some Options API methods Options#isDataOrbsOn Options#isMouseCameraOn Options#isRemoveRoofsOn Options#setDataOrbs Options#setMouseCamera Options#setQuickPrayersOn Options#setRemoveRoofs Options#setRunOn Add many Options API methods A lot of methods have been added (too many to list). See: Options Fix broken Options API methods Add Interfaces API methods Interfaces#get(int, int, int) Interfaces#isInterfaceSubstantiated Fix RSInterface#isBeingDisplayed
    • By TRiLeZ
      This release features:
      Replacement of Random (which uses a linear congruential formula) with SecureRandom with the RNG methods in the General API. This will prevent possible detection of bots through the flaw in the linear congruential formula. Fix resizable mode client crashing bug Add support for side panels in resizable mode Make better use of caching with minimap projection Add better detection of trade windows Add better viewport detection for resizable mode Fix broken hooks with today's OSRS client update
    • By Fishies
      I'm having an issue on my linux server where I connect with VNC, startup the client and script and everything works fine. Even when I close out of the VNC my bot continues to run fine, but when I log back into the VNC (to checkup or whatever) it crashes the client and logs the bot out. I have all power management settings turned off, and have no idea why this is happening or how to fix it. It dosn't disable my farm, but is extremely annoying having to restart the client every time I want to check up on the bot. Thanks!
    • By r0ot
      I've nearly got TRiBot running on an Ubuntu machine but have run into an error with the loader.  When I run the loader for the first time and it populates the dependencies folder, the file togl.dll get's downloaded instead of libTOGL.so which TRiBot.jar eventually looks for.  Error looks like this:
      Loading TOGL Loading: /home/<user>/.tribot/dependancies/libTOGL.so Exception in thread "AWT-EventQueue-1" java.lang.UnsatisfiedLinkError: Can't load library /home/<user>/.tribot/dependancies/ibTOGL.so Inside my dependencies folder there's a file called togl.dll.  The bug report forum says I need to post here before I can post there.
  • Our picks

    • Over the past few months, I’ve been working diligently on a new project - TRiBot X. Everything has been written from the ground up, with all of the best practices of software engineering. Every aspect of TRiBot has been re-imagined to support three main goals: flexibility, useability, and reliability.
        • Like
      • 50 replies
    • Come give us feedback on the next version of TRiBot!
        • Thanks
        • Like
      • 86 replies
    • TRiBot is looking to improve a lot of its customer relationship management, customer on boarding process, customer experience, design elements, community engagement and pretty much everything else you can imagine when it comes to marketing.

      Our goal: To ensure that the marketing done TRULY reflects the experience and does not shine an inaccurate light on what TRiBot is lacking in.

      So I ask, what do you love about TRiBot and what do you hate about TRiBot? What does O S Bot, Rune M8, PowR Bot and Dre amBot do better? (yes I purposely didn't spell it right 😂).

      Love, 

      RileyZ
        • Like
      • 25 replies
    • Over the last three weeks, I've been working on upgrading our server infrastructure. It's finally ready and is now live!

      Why?

      Increased reliability - less server errors


      Increased availability - less downtime


      Increased security - keeping us and you secure


      Increased capacity - ability to serve you better


      Increased speed - less waiting for things to load


      Faster development - server and service updates will come faster


      What are the changes?

      Move from a single AWS EC2 instance to AWS ECS (Elastic Container Service)


      Distributed computing


      Load balancing


      Git management of server files and filesystem


      Redis caching


      How?

      AWS ECS (with 10 EC2 instances)


      AWS ElastiCache (Redis)


      AWS Load Balancing


      AWS EFS (Elastic file system)


      Please bare with us as I continue to tune the server for maximum performance. Slow loading speeds may occur temporarily. I thank everyone for their patience.

      Please post on this thread if you experience any issues other than slow loading times.
        • Like
      • 51 replies
    • This release will:

      Fix prayers and world hopper API (Thanks @JoeDezzy1 and @erickho123)


      Improve banking API (Thanks @Encoded)


      Adds methods for returning and using Java Lists, rather than arrays


      Slightly randomizes some hardcoded behaviour


      Removes sleeps from waitConditions; the efficiency saving potential is negligible in these use-cases, therefore cleaner code is preferable


      Other back-end improvements





      Note: If you are using LG, please restart both the RS client and TRiBot.
        • Sad
        • Haha
        • Thanks
        • Like
      • 90 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...