Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

Sell OSRS Gold
YoHoJo

[GUIDE] How to Use TRiBot Looking Glass & Bot Through the Official Runescape Client

Recommended Posts

More Runescape Botting Guides at https://RSBotSpot.com
Join our Runescape Botting Discord chat channel here
Original/Updated Article here at RSBotSpot

This guide contains affiliate links

How to Use TRiBot Looking Glass & Bot though the Official Runescape Client

TRiBot’s Looking Glass feature allows you to bot through the official Runescape client by hooking onto and controlling it. Looking glass also supports proxies for botting & other clients like OSBuddy.

While there’s no evidence that TRiBot is detectable, this feature was released as a form of antiban for users worried about the potential detectability of botting clients. Botters seem to be torn 5050 about the effectiveness of Looking Glass on bans, but it never hurts to have some extra protection. This guide will cover how to use TRiBot Looking Glass to bot through the official Runescape client!

1. Install Java Development Kit (JDK)

Download and install JDK here. I will be using 32 bit JDK 8u151.

Java%20Development%20Kit%20Download.png

Java Development Kit Download

At the time of writing, only Java 8 is supported.

2. Load Runescape & TRiBot

Load Runescape up to the login screen, and TRiBot up to the client select screen.

3. Start Looking Glass

On TRiBot, click the “New Client (Looking Glass)” button.

K5xFJKj.gif

Hooking TRiBot to the Official Runescape Client

4.(Optional) Set a Proxy

If you’re using a proxy for runescape botting, now’s the time to apply it. To do this: right click the client’s tab on TRiBot, and select “Set Proxy”.

TRiBot%20Looking%20Glass%20Set%20Proxy.p

TRiBot Looking Glass Set Proxy

That’s it, you’re done!

Your TRiBot client is now hooked onto the official client, and you’re ready to start botting Runescape!

Helpful Links:

  • You can find out more about TRiBot’s Looking Glass feature on it’s release thread here
  • You can find out more about using proxies with TRiBot Looking Glass here
  • You can find more working Java/Client version combinations reported here 
  • More setup guides: By Einstein
    Note: Some threads are only visible to TRiBot VIP users.

Our Favorite Runescape Botting Proxy Providers

We've tested and had great results with Runescape botting proxies from:

Our Other Guides:

Edited by YoHoJo
  • Like 2

Share this post


Link to post
Share on other sites
Array
1 hour ago, sevant said:

@YoHoJo

I can never get it to detect the official client. It will run perfectly using the osbuddy client, but I always get the no client found message when trying to load it up using a normal client. Any advice?

Use same Java version I did in the guide and try. 

Share this post


Link to post
Share on other sites

Yeah I get the same issue as Samkent. I keep getting the 'No RuneScape client was found' message. I used both "Java SE Development Kit 8u151" and "Java SE Development Kit 8u152" on the 32 Bit and 64 Bit versions. I tried these with both the 32 Bit and 64 Bit OS Buddy clients. I even tried it on the official Old School Runescape client but still getting the same message.

I'm running a Windows 7 Ultimate 64 Bit operating system. My web browser is Google Chrome Version 63.0.3239.108 (Official Build) (64 Bit). I download and installed Jarfix 2.1.0 but that hasn't helped either. If someone has a solution to this, can they please respond?

Cheers :D

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Optimus
      Welcome to Optimus AIO Combat & Magic!
      Glossary:
      1. Description

      2. Combat Overview
           2.1 What Can the Script Kill
           2.2 Core Combat
           2.3 Looting
           2.4 Banking
           2.5 Progressive Training
           2.6 Worldhopping
      3. Magic Overview
           3.1 Regular Spellbook
           3.2 Ancient Spellbook
           3.3 Lunar Spellbook
           3.4 Combo Alching
      4. Purchase Info & 10 Hour Free Trial.
           4.1 Packages
      5. Testimonials
      6. Gallery
      Total Runtime Statistics:
       
      GUI Preview: 

      1. Description:
      Optimus AIO Combat & Magic is a script engineered to safely train up your Combat, Magic and Slayer skills using nearly every training method available in the game.

      Using ABC2 technology and thousands of hours of real human playing data, the script now out-performs most human players, while also avoiding bot-detection and staying under the radar from Jagex.
      2. Combat Overview:
      2.1 What Can the Script Kill?:
      The script is capable of killing every monster in the game, below are some noteworthy opponents: 
      Dragons - Including Green, Blue, Red, Black, Brutal, Adamant& Rune dragons - Amazing for goldfarming or training up your account.  Slayer monsters - Dark Beasts, Cave Krakens, Abyssal Demons, Drakes, Spiritual Mages/Warriors, Wyverns, Nechryaels, Gargoyles, Dust Devils & everything below. It will automatically use the required slayer items for finishing.  Crabs - The script can kill ALL types of crabs: Rock, Sand, Swamp and Ammonite crabs! are all supported. The script will reset the aggressiveness when they stop waking up.  Experiments - Insane XP for pures. Yaks - Insane XP for mains. Chaos druids - Good goldfarming for medium level accounts. All wilderness monsters - Good for farming emblems & wildy slayer.  Dagannoths - Insane XP, I recommend bringing a cannon for maximum gains.  Nightmare Zone Bosses - The script can kill all bosses inside NMZ and drink all the potions. It will end once the dream is complete.  Stronghold of Security and other dungeons - The script supports all of these locations.  Plus 1000's of other monsters - Literally anything you can think of, some people even use it for KBD.  2.2 Core Combat:
      Below are some of the core features that make the script so powerful. Using the features mentioned below the script can perform just as good as any player. 
      Custom fight areas - You can specify exactly where in the game you want the script to fight. Either with a polygon or a circle. Below is an example of a polygon fight area. Dwarf multicannon - The script will place, reload, pickup and stop your cannon decaying. Prayer - The script can use all prayers, including quick prayer, and even recharge your prayer at nearby altars.  Potions - Including Divine, Extended, Super, Regular, Energy, Stamina & NMZ potions.  Special Attacks - Supports every special attack weapon in the game, including weapon switching.  Guthans - The script can switch to Guthan's to heal, then switch back to your primary gear once hp is recovered.  Resetting Aggressiveness - The script can detect when monsters stop being aggressive towards you, and run away to reset the aggro.  Food - It can eat every type of food in the game. Even multiple types of food, simply seperate their names with a comma E.G Lobster, Swordfish. Bones to peaches - The script efficiently uses Bones to peach tablets if you've got them in your inventory.  Safe spotting - Safely train combat from a distance without taking any damage.  Uses slayer items to finish kills - Bags of salt, ice coolers, rock hammer etc. Detects if you've unlocked the slayer ability to auto-kill.  Bone burrying - Train up your prayer! 2.3 Looting:
      Looting by item name or ID - Simple to setup Looting by item price - E.G Loot all items over 500gp - Fetches prices from the Runescape grand exchange. Telekinetic grab support - For those hard to reach places.  High alching - Turn your loot into gold while you train! Pickup and re-equip ammo - Supports all ammo types. Ironman looting - The script will automatically detect if you're an Ironman, and loot accordingly.  Looting bag & Herb sack  - The script will automatically use them if you're carrying one. Accurate profit calculations  - Track your gains on screen or with your dynamic signature.  2.4 Banking:
      Supports every bank in the game - Can use every bank chest / booth / banker in RS. Fully customisable inventory setups. Tip 1: When withdrawing potions or charged jewellery, you can type (*) Instead of the dose number and it will withdraw whatever dose is highest in the bank. 
      For example Ring of duelling(*).  Tip 2: You can also type 0 as the quantity, and it will withdraw-all of the item instead of a specific quantity. 
      For example these settings would make it withdraw all of your cannonballs, then fill your inventory with lobsters.

      Supports all Teleports - The script can use all teleport methods including Spells, Tabs, Jewelery & Scrolls + more. Will bank for multiple conditions: 
      - Hp is below a set %.
      - Inventory is full.
      - Out of food.
      - Out of runes.
      - Out of ammo.
      - Out of all potions.
      - Out of prayer potions.
      - Out of antifire potions.
      - Out of cannonballs.
      - Before a break starts.
      - When your slayer task is complete. Heals to full HP at the bank - To save food during your trip, it'll heal up in the bank.  Logs out when you're out of supplies. 2.5 Progressive training: 
      The script can do the following when you level up, or after x amount of time:
      Upgrade equipment - E.g upgrade to Rune scimitar when you reach 40 attack. Change attack styles - E.g switch to Strength training after you reach 40 attack Change training method / location - The script can completely switch training methods, e.g Rock crabs to 60 strength, then go train magic to 70 alching, then switch back to Chaos druids after an hour. All without stopping the script.  2.6 Worldhopping: 
      The script uses both the ingame worldhopper and login screen worldhopper to find the ideal training spot. Note: All of these settings are optional. 
      Supports F2P, Members & DMM worlds  - It will automatically detect which you're in, and select worlds accordingly.  Worldhop when x players in your area - The script can count how many players are around and worldhop if it gets too busy.  Worldhop when there's a cannon in your spot - To avoid reduced XP / GP rates. Worldhop when there's a Jagex Moderator nearby - A safety precaution.  Worldhop when the break handler activated - So someone doesn't see you training for prolong periods of time. Worldhop when someone talks in your area. 3. Magic Overview:
      The script can train with pretty much every training method available, from Air strike to Ice barrage, it's all supported. 
      (The script can also loot, use cannon etc while using non-combat methods).

      3.1 Regular Spellbook
      The script can use the following regular spellbook spells, both in combat & out of combat.
      Splashing Strike spells Bolt spells Blast spells Surge spells Enchant jewelry spells Superheat items Enchant crossbow bolt spells Curse spells Alchemy spells Teleport spells 3.2 Ancient Spellbook
      The script can use the following ancient spellbook spells.
      All rush spells All burst spells All blitz spells All barrage spells 3.3 Lunar Spellbook
      The script can traing using the following lunar spellbook spells.
      Humidify Superglass Make Tan Leather Plank Make Spin Flax String Jewelry  3.4 Combo Alching
      The script can also Combo alch, meaning it will cast the high alchemy spell after using another spell to recieve rapid XP.
      It can combo alch with the following spells:
      Combat / Alch - E.G Fire surge & Alch at the same time Curse / Alch - From curse up to stun it's all supported. Earn up to 180K XP/Hour Teleport / Alch - Very fast XP.  4. Purchase info and script trial info:
      Packages:
      Free Trial
      Instance count: 1
      Duration: 10 Hours per month
      $10 Package:
      Instance count: 4
      Duration: 1 month
      $20 Package:
      Instance count: 10
      Duration: 1 month
      $30 Package:
      Instance count: 20
      Duration: 1 month
      $50 Package:
      Instance count: 50
      Duration: 1 month
      All packages include:
      VIP is not required to run the script
      The ability to train all of combat and magic effortlessly and safely for the duration of your subscription.
      Complete customer support via discord and the TRiBot forums
       
      To purchase the script or activate your free trial, click the image below:
      TRiBot Repository | Optimus Combat & Magic

       
      5. Testimonials:

       
      6. Gallery:
      Killing 15,000 abyssal demons and getting over 26 whips on one account.














    • By ELON
      [ FREE ]   ELON Combat AIO  [ Open Source ] 
       

       
      . Description:
      Train Combat Anywhere Banking support Looting support Potion support ABC2 LVL10 Free Fully Open Source JavaFx Gui Paint  GET SCRIPT HERE: https://tribot.org/repository/script/id/3549
      SOURCE LINK: https://github.com/Elon333/Scripts
      P.S.
      If you have any questions, about the script or the source feel free to post me on here.
      Feedback on source or script is appreciated good or bad.
      What Feature would You Like to see Added Next?
    • By rajche
      Hello guys. I've tried every possible setup with java jdk 1.8.0_202 and java jdk 1.8.0_252. Osbuddy, openosrs, every guide found on forum so far, and yet i my looking glass can't seem to find osbuddy or openosrs or any client for that matter. I've deleted hooks, followed natan script that deletes cache/hooks/everything, but so far i'm stuck not being able to load it, also tried updating java policy for full permissions. . Can someone suggest something that i might be overlooking?
      (I've tried this with windows 7 32 bit, windows 10 64bit(reinstalled both 2x)), same problem. I have it running with no problems with the same steps i did on a computer just next to me. I do not understand at this point what am I doing wrong? Can someone please guide me?
    • By lau1992
      Hi!
      I was playing around with a VM as it is easier to manage multiple instances for me personally on my local machine (I do not use proxies, but use a vpn). But I can't get LG to work... On my local machine everything runs smooth, but on the VM it always says "looking for OSRS client" (you know the message). I have the same configuration as on my local machine.
      Is there a configuration property to be set on VM level or something? 
      All suggestions are welcome!
      --------Specs of the VM:
      - Clean install with VMware Workstation 15 Player running Windows 7 Ultimate (also tested with Windows 10 with VirtualBox)
      - Java JDK 8u251
      - OSBuddy.jar
      - Tribot loader 4.0.4

    • By ah12ims1
      as the title suggests, it works, but my issue is that for me it only works with OSbuddy. 
      this is what i have installed for java  
       
      however when i try and open the runelite (or open osrs) jar file i get this error 
      so, i inquired about what i should do to get RL or OPRS working, i installed JDK 11 (also 13 after to check if there was any diff, but none).
      this lead to RL working, but then my Tribot loader AND my OSB wouldnt load.
      my tribot loader didnt even give an error, it just didnt open, and my OSB gave this error 
       
      can someone please help me out, i just want to use tribot looking glass witrh runelite instead of OSB
    • By briareos2285
      Just got a new Windows 10 Home x64 Laptop. Going through my usual install method and finding that I cant get looking glass to work. I have followed a few "old" guides, because I cant find any that are more recent. I am installing Java SE Development Kit 8u251, I am choosing the x86 version since the only OSbuddy cross platform .jar  file is 32bit. Its worked fine in the past. I then open Osbuddy, and then Open Tribot. I leave it on the default Tribot Version of 10.24.1. I select the java version for Tribot to use to be the JDK and not the jre. I changed the Heap Size to 1024 MB and login. I minimize Osbuddy, then I click New Client(Looking Glass). The Screen goes to black and says " Waiting for a Runescape client.... currently waiting for a valid client. List of detected java applications below." and there is nothing Below. I also tried a backup method that used to work as well, which was to instead click New Client (Osbuddy) and then manually select the Osbuddy .jar file which would open up Osbuddy and Create a Looking Glass Tab that mirrored Osbuddy. This no longer happens either. Ive also deleted the Hooks and Caches using Naton's Java Executable. I have also defined the correct Paths in my Computers Environment Variables.
      Im at a loss for what to do. Any help greatly appreciated
    • By Optimus
      Optimus AIO Firemaker is a free All In One Firemaking script that's efficient and easy to use.
      Overview:
      Start the script with one click. It will automatically detect which logs to use from your inventory or bank, and progressively train your firemaking until you run out of logs.

      ~ Withdraws tinderbox if you don't have one
      ~ Supports all logs types
      ~ Progressive training - Will automatically start burning better logs if they're available
      ~ Smart algorithm to detect best area to burn
      ~ One-tick burning
      ~ Logs out when out of logs
      ~ ABC2 Antiban
      ~ Sleek paint
      ~ Lit AF 
      Supports 8 different locations:
      (The script will automatically detect the nearest location)
      ~ Varrock West
      ~ Varrock East
      ~ Grand Exchange North
      ~ Grand Exchange South
      ~ Falador East
      ~ Draynor Village
      ~ Duel Arena
      ~ Seers Village
      ~ More to come (Open to suggestions).
      Gallery:




      Free repository link:


       
      Hope you all enjoy the script! Feedback is appreciated  
    • By tomking50
      Hello, 
      I've just purchased this bot and im wondering how do i set breaks to avoid bans?
       
      Thank you,   
  • Our picks

    • Over the past few months, I’ve been working diligently on a new project - TRiBot X. Everything has been written from the ground up, with all of the best practices of software engineering. Every aspect of TRiBot has been re-imagined to support three main goals: flexibility, useability, and reliability.
        • Like
      • 49 replies
    • Come give us feedback on the next version of TRiBot!
        • Thanks
        • Like
      • 86 replies
    • TRiBot is looking to improve a lot of its customer relationship management, customer on boarding process, customer experience, design elements, community engagement and pretty much everything else you can imagine when it comes to marketing.

      Our goal: To ensure that the marketing done TRULY reflects the experience and does not shine an inaccurate light on what TRiBot is lacking in.

      So I ask, what do you love about TRiBot and what do you hate about TRiBot? What does O S Bot, Rune M8, PowR Bot and Dre amBot do better? (yes I purposely didn't spell it right 😂).

      Love, 

      RileyZ
        • Like
      • 25 replies
    • Over the last three weeks, I've been working on upgrading our server infrastructure. It's finally ready and is now live!

      Why?

      Increased reliability - less server errors


      Increased availability - less downtime


      Increased security - keeping us and you secure


      Increased capacity - ability to serve you better


      Increased speed - less waiting for things to load


      Faster development - server and service updates will come faster


      What are the changes?

      Move from a single AWS EC2 instance to AWS ECS (Elastic Container Service)


      Distributed computing


      Load balancing


      Git management of server files and filesystem


      Redis caching


      How?

      AWS ECS (with 10 EC2 instances)


      AWS ElastiCache (Redis)


      AWS Load Balancing


      AWS EFS (Elastic file system)


      Please bare with us as I continue to tune the server for maximum performance. Slow loading speeds may occur temporarily. I thank everyone for their patience.

      Please post on this thread if you experience any issues other than slow loading times.
        • Like
      • 51 replies
    • This release will:

      Fix prayers and world hopper API (Thanks @JoeDezzy1 and @erickho123)


      Improve banking API (Thanks @Encoded)


      Adds methods for returning and using Java Lists, rather than arrays


      Slightly randomizes some hardcoded behaviour


      Removes sleeps from waitConditions; the efficiency saving potential is negligible in these use-cases, therefore cleaner code is preferable


      Other back-end improvements





      Note: If you are using LG, please restart both the RS client and TRiBot.
        • Sad
        • Haha
        • Thanks
        • Like
      • 90 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...