So I recently got into Botting with tribot, and before I started out with any of my own bots I did a ton of research and reading about safe bottling practises and tips to prevent bans.
I decided to bite the bullet and try out a few accounts. I got 5 private ipv4 socks5 proxies, 5 unique email addresses, and created the 5 accounts through a browser with proxy support so I was creating each account on a separate IP.
Then I got tribot setup and set each proxy to one of the 5 tabs I opened in tribot. I logged in to each account and got them through tutorial island.
Then I decided to try out the same script on all of them (all on different worlds and still on different IP's) and within a little over an hour, about.5 minutes apart, they were all locked. Now they weren't banned from what I can tell, I got the message "your account has been locked as we suspect it has been stolen".
I'm wondering what caused this to happen, and on all 5 of my accounts?
Thanks in advance!
Hi i havent used tribot in a while, thankfully i have somehow not logged out in like forever but i cannot remembermy password. i attempted to use"forgot password on the bots opening but no luck keeps saying unavailable, can anyone help me out? am i doing something wrong
Hey all, this is my first forum post so apologies if it's in the wrong section or whatever.
I recently attempted to set up my first gold farm, purchased 3 private proxies from virmach, created the RS accounts using maxthon and the proxies, logged into the accounts using the aforementioned proxies and used a tutorial island script.
However on return to the RS login screen I get the error "Account locked as we suspect it has been stolen".
Did I do something wrong in the account creation, will this flag my proxy IP's?
By we trippy mane
Hello so I just started botting again I bought a proxy from virmach. I used widecap to proxy osbuddy and used tribots looking glass proxy option as well. I also created the account on a browser using the same proxy. My golden rule is never to bot on more then 4 accounts at once per IP. I made a total of 5 accounts, waited one day to make the last one, I was never logged into more then 4 accounts. Is my virmach proxy flagged? Think I will get chain banned now? I invested $50 into this, I'm so disappointed. I asked virmach to give me a new proxy but it seems the damage has already be done. I will be banned soon right? Botting on 3 accounts, was going to buy another proxy and bot on 4 more.
By Toxic Hacker
I need help splitting Bot's through profixier or any software you know simillar to it, I already have a a lot of private proxy's with auth, it is fresh and working perfectly.
Just need a little help, with splitting accounts, I don't use tribot feature proxy, not so noob at all* I am using Bitvise SSH Client for now and profixier aswell.
If anyone knows any good software where you can split accounts in different proxies please share below in comments! I will appreciate very much!
Toxic Hacker ^^
Hello dear botters / scripters,
Does any of you know the solution or are familiar with new fresh accounts getting LOCKED right after you log out?
3 out of the 4 accounts I created ALL with different proxy were locked the first time after I logged out, now i'm afraid to bot on them because
I have the feeling they are watching me!
THE WAY I MAKE MY ACCOUNTS:
[ 1. setup PROXY 1.0 on Maxthon browser (on local PC)
2. Setup PROXY 1.0 on Tribot Client. (on a private server i hired somewhere in Europe.)
3. Create RS-account on Maxthon browser With PROXY 1.0 (on local PC)
4. PLAY (not bot) Runescape for several HOURS on that server in Europe with PROXY 1.0 on the Tribot client before logging out]
WHAT AM I DOING WRONG?
is not removing the cashe the problem, if that is NOT the problem, what is?
I am going through tutorial island without touching a bot, i am playing runescape without using a bot.
However, I am using the Tribot client, but Runescape doesn't detect that.
Also, all the 3 accounts are member.
Thank you guys <3
I am 100% willing to do any kind of account you could want, just message me what you're looking to have done and we can discuss the price and time estimate!
I've been playing Runescape for about 11 years or so now, and I am entirely addicted. I find that training new accounts is fun for me and I love the grind so this seems like a nice fit for me!
As I am newer to this and not entirely sure on standard pricing, all prices can be discussed in pm's! Standard prices will come later!
Things to note:
I will not go first unless you have enough feedback for me to feel comfortable doing so, sorry it's just too risky! All time estimates are exactly that, estimates. I will try my best to stick to the time frame but it's not always guaranteed All items will be supplied by me! All accounts will be done by me, by hand. (Unless otherwise instructed to use a bot by the account holder for a lesser price) I will only deal in OSRS GP to help prevent charge backs. All accounts will be done on fresh clean proxies unless you would like me to use a proxy of yours to prevent your account from being locked due to location changing! Terms & Conditions:
I am not responsible for any bans on your accounts after my service is completed You may not log into the account mid way through the service for my safety and yours Your account should have no valuables in the bank for the sake of nobody trying to claim I stole from them If I am using your proxy for your account, I will not ever use for any other account, and it will be deleted from my client after the service is complete! If your monkfish go missing, blame @TRiLeZ If you see any ways my thread could be improved feel free to comment or pm me!
Has anyone had success getting SOCKS5 proxies to authenticate in TRiBot using an IP vs. Username / Password? If so, any access to a walk-through?
Currently able to authenticate with Username / Password with no problem, but receive an error when trying to use IP.
I am struggeling with VPS and dedicated servers for more than two weeks now. I followed several tutorials but can't make it run stable. I often get messages as:
'Your connection has been gracefully closed'
Autentication reason: too many authentication failures'
'No response from server'
'Server actively refused the connection'
I noticed that a lot of those errors occur when I use to much CPU on my VPS. Then I have to reinstall the operating system and reinstall the software and the same problem will occur eventually.
Therefore I decided to invest in a dedicated server which should be able to have atleast 50 bots running. Eventhough I was only using 4% of the CPU while running 7 bots the same problem occured and I got kicked from the server again. I just need some one to set up a stable server for me and I am willing to pay for that.
Last week we tried to roll out Auth0 Login, but we lost that battle. Now it's time to win the war!
When logging into the client, you'll now have to enter your Auth0 account credentials instead of your forums credentials
Note: 2FA is still handled through your forums account (for the time being)
Changes for existing users
You'll have to link your Auth0 account to your forums account here: https://tribot.org/forums/settings/login/?service=11
Auth0 accounts have been created for most existing users. Please use your forums email address and password to login.
Make sure to verify your email address upon creating a new Auth0 account
When we mention your Auth0 account, we mean your account used for auth.tribot.org as displayed below
To better support the upcoming changes (TRiBot X, new repository), we're switching our login handler to Auth0. Instead of logging in with the standard form, you'll now be required to login through our Auth0 application.
All existing accounts which have been used within approximately the past year have been imported into Auth0 using the same email and password combination which has been stored on the forums.
What does this mean for users?
Your account credentials are now even more securely stored
You'll be able to login via Facebook, Google, and others in the future
Is there anything users have to do differently now?
Existing users: You'll have to login with the standard login, open your Account Settings, then link your Auth0 account
New users: You'll be redirected to our Auth0 app (auth.tribot.org) where you'll be able to create an account
Why was this change made?
The new apps we are creating (such as the new repository) aren't able to use the forums to handle user logins
To centralize all user accounts in one area
To ensure that the client login doesn't go down when the forums are having problems
To speed up our development
There's no documentation or official support for using Invision Community combined with Auth0, so there are still a few kinks we're working out
We're in the works of creating an account management panel specifically for Auth0 accounts (ETA August)
It's not possible to change email addresses for the time being (this will be resolved this August)
Changing passwords is a weird process for the time being. To change your password, you'll have to use the "Don't remember your password" tool on the Auth0 login page
Over the past month, we've been working hard on TRiBot's new repository - a much needed update. This change has been deemed necessary for TRiBot X, and will allow us to really speed up development of all aspects of TRiBot.
Today we are going to share what we've been working on!
Now you must be wondering what kind of features the new repository will have.... well, you'll have to be patient for a little while longer. We're still figuring out various technical aspects so we can't provide answers to all possible questions. We're also focusing on development rather than writing about it so that everyone can get access to our latest developments at lightning speed. I will however answer a few users' questions.
We're planning on a release of this early to mid August, giving users some goodies before TRiBot X's release.
Thank you all for being patient. I hope everyone is excited as much as I am!
Over the past few months, I’ve been working diligently on a new project - TRiBot X. Everything has been written from the ground up, with all of the best practices of software engineering. Every aspect of TRiBot has been re-imagined to support three main goals: flexibility, useability, and reliability.
Come give us feedback on the next version of TRiBot!
Recently Browsing 0 members
No registered users viewing this page.