Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

Sell OSRS Gold
Fluffee

[Tutorial] Setup Debian (VPS) (6.x, 7.x, 8.x) for Botting (32 and 64 Bit) LG Support Updated August 20th 2016

Recommended Posts

1 minute ago, ZafyTv said:

Because its the link in his thread. The (32bit) (64bit) one..

Anyways, i found out there were more links in the bash script which were old and useless so the only person who can fix is Fluffee.

Am making my own tutorial soon.

Nope, https://dl.dropboxusercontent.com/u/81527571/ is the dropbox in iFluffee's code

Share this post


Link to post
Share on other sites
2 minutes ago, Prankxter said:

Nope, https://dl.dropboxusercontent.com/u/81527571/ is the dropbox in iFluffee's code

Gawd.

"

(32 Bit)

apt-get update && apt-get install -y sudo wget && wget --no-check-cert 'https://dl.dropboxusercontent.com/u/81527571/Debian%207%20(32%20Bit)/install32.sh'&& chmod +x install32.sh && ./install32.sh 

(64 Bit)

apt-get update && apt-get install -y sudo wget && wget --no-check-cert 'https://dl.dropboxusercontent.com/u/81527571/Debian%207%20(64%20bit)/install64.sh'&& chmod +x install64.sh && ./install64.sh 

The command above installs sudo and wget (Installed by default in Debian 7.0+), downloads the install bash script from my Dropbox, gives the script run permissions, and then runs the script.

 

If you'd like to view the script before running it (which you should): 32 Bit 64 Bit"

the reds are same thing mate. the one i changed to is the download link of  ^^ which is how the script works.

Share this post


Link to post
Share on other sites

I know what the commands do lol. I was just asking how your url could be verified to be iFluffee's dropbox. Bash script could easily be looked through, but I was just curious as to why you would say it's iFluffee's dropbox. You said https://www.dropbox.com/s/p2ivlkkvd5p3aig/ belong to iFluffee when https://dl.dropboxusercontent.com/u/81527571/ is the url iFluffee is using in his command, which you quoted, and then said your command installs your script. That's all I wanted clarified.

Edited by Prankxter
Guess Debian doesn't have sudo installed by default. wtf

Share this post


Link to post
Share on other sites
11 hours ago, ZafyTv said:

Hey Guys! So if you're experiencing the issue of 404 NOT FOUND.

Heres the steps to fix it:

Replace the link in the script and rename the installation file.

To help you out, heres the working code. (Still iFluffe's dropbox. Not mine)

(64bit)

apt-get update && apt-get install -y sudo wget && wget --no-check-cert 'https://www.dropbox.com/s/p2ivlkkvd5p3aig/install64.sh?dl=0#' && chmod +x install64.sh?dl=0 && ./install64.sh?dl=0 

PM Me for 32bit.

 

@iFluffee please add this to ur front page so that people can use it properly :)

Thanks.

 

P.S. Would u mind if i create a new thread about how to set up with ur bash script? Thanks

Yeah, as you stated there are links inside the script that are most likely still broken due to dropbox discontinuing public folders. I'll move the whole thing to GitHub soon and that should bring it back online.

7 hours ago, Prankxter said:

How can people prove that https://www.dropbox.com/s/p2ivlkkvd5p3aig/ belongs to iFluffee?

 

7 hours ago, ZafyTv said:

Because its the link in his thread. The (32bit) (64bit) one..

Anyways, i found out there were more links in the bash script which were old and useless so the only person who can fix is Fluffee.

Am making my own tutorial soon.

I actually have another setup script in progress, which is much cleaner and handles multiple Operating Systems instead of just Debian. However, it still needs bugfixing, and given that I have final exams for the next two weeks, I doubt I'll be making much progress on finalizing the new script. Thanks for the interest though, it certainly keeps me motivated to finish the new one :)

Share this post


Link to post
Share on other sites

Shhhh no let's just keep it our little secret how to setup linux servers for botting! :D I think it's very nice of you all to make a bash script for very new people to setup a linux vps for botting as it can be extremely difficult. I won't release my bash commands for ubuntu, though, too competitive for that haha

Edited by Prankxter

Share this post


Link to post
Share on other sites
On 4/10/2017 at 1:29 AM, Prankxter said:

Shhhh no let's just keep it our little secret how to setup linux servers for botting! :D I think it's very nice of you all to make a bash script for very new people to setup a linux vps for botting as it can be extremely difficult. I won't release my bash commands for ubuntu, though, too competitive for that haha

exactly, fluffee should get so much credit for such a thing, a friend of mine took him 1 month to learn how to set it up, while fluffee is just giving his free copy away.

Share this post


Link to post
Share on other sites
Guest

I haven't done it yet, but I'll take a look inside the script and see what links are dead. That's the issue with following a year old tutorial, most of the time links are old/dead.

Give it time. :)

Share this post


Link to post
Share on other sites
On 08/10/2017 at 8:30 PM, tomelis3211 said:

I am getting 404 not found with 32 and 64 bit

 

6 hours ago, ToxicWars said:

I haven't done it yet, but I'll take a look inside the script and see what links are dead. That's the issue with following a year old tutorial, most of the time links are old/dead.

Give it time. :)

This is an old guide. He has a version 2 that currently works.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By lawjestaw
      !!Huge SALE for the next 48 Hour!!
      Welcome to Tribot's RDP & VPS Store

      Here you can get High Quality and Cheap RDP for 1 month 
      ------------
      Location : US, Virginia
      Duration : 28-35 days
      Renewable: Non-renewable
      Usage: Everything is allowed, except +18 sites, you need to use VPN
      ------------
      ------------
      Payment method: BTC | OSGP | or PP (For high ranking members)

      PM me on Tribot
      OR
      Discord- Lawjestaw#5137
       
       
    • By porkthug
      So I've been playing OSRS casually for a couple years now and only tried botting a handful of times, mostly out of curiosity. I'm looking to get back into botting more seriously (as in enough to make a real profit from it). I know some of the basic measures to take for safe botting and whatnot, but I have some general questions.
      Can I expect a profit from only botting 2-3 accounts for around 12 hours a day? I'm running a not-so-speedy computer that probably can't handle much more than that. How many accounts should I trade my gold through to avoid bans? And how often should I dump the gold off of a botted account? I know I should use proxies if I'm doing multiple accounts, but it seems like a VPS isn't necessary right now. I'm new to both so any suggestions are welcome. Should I start with F2P bots? I have about 40m on my main that I could spend on bonds. I have no experience coding or writing scripts. Is it worth learning right now or am I okay to just download/buy other people's scripts? Sorry if this isn't the right place to ask these questions or if they're too general. I'm a little overwhelmed with all the technical stuff involved in botting. Seems like most guides are kind of dated too.
    • By D Bolter
      Accepting OS GP ($0.5/m), Skrill, Crypto (coinbase), PayPal (friends/family/gift), Venmo
      prices are for 30 days
      Residential Proxies are $15 each
      Discord (preferred): ash#2176
      Skype: dboltertemp
       
      Terms of Service:
       
       
    • By Fluffee
      Creating this thread to provide an easy way for me to link new users to my tutorials, as well as have them all in my Signature, without making it obnoxious.
      -- Fluffee's Ultimate Guide to Botting Series --
      -- General Tutorials --
      -- AutoHotKey Releases --
    • By MNO
      We offer 3 packages, all packages come with the following things pre-installed:
      Windows 10 Java Google Chrome Firefox Dreambot You will get acces through a Remote Desktop Connection (rdp) which we will setup for you.
      Ordering can be done through discord:
      Server: https://discord.gg/jzwNzED
      User: Nex#8648 (UID: 109992979057373184)
      We accept most crypto & rsgp. (Paypal for trusted users)
      We currently offer the following packages:
      Bronze Server
      CPU: Intel Core i7-4770  (or equiv) RAM: 8 GB  Can run: ~12 bots $40/Month
      Iron Server
      CPU: Intel Xeon E3-1275V6  (or equiv) RAM: 64 GB  Can run: ~17 bots $60/Month
      Steel Server
      CPU: AMD Ryzen 7 1700X (or equiv) RAM: 64 GB  Can run: ~25 bots $80/Month  
      TOS:
      1) You will not use this service for any illegal activity.
      2) You will notify us in time for a renewal of service's (>1 week ahead).
      3) All payments are final and we offer no refunds.
      4) By using our service you agree to these terms.
      Breaking any of these will result in instant termination of service with NO refund.
       
    • By Flax
      Debian 7.0 VPS Setup Guide for TRiBot Botting. 
      By: Flax
       
      Hey guys today I'm going to show you how to setup a VPS for TRiBot botting, I'm making it because I got so many questions from people about this & most VPS guides here are pretty outdated.
      Make sure your VPS operating system is Debian 7 32 or 64bit, or else this guide will not work for you!
      Okay, let's begin.
       
      First off you'll need these programs:
      - PuTTy
      - TightVNC Viewer
      Once you've downloaded those files we can begin setting up your VPS.
       
      Step 1: Open PuTTy and enter your IP and click connect (You should keep the port 22)

       
      Step 2: Now a command prompt will pop up and it'll ask you for a username, Type ' root ' and after that it'll ask you for a password, type in the password that was given to you by your VPS provider.
       
      Step 3: Now you should enter the following commands one-by-one, it can take awhile to install depending on the speed:
      apt-get update apt-get install curl curl https://dl.dropboxusercontent.com/s/jabcbltmn5fuevx/install.sh | sh apt-get install iceweasel Step 4: After that's done you should be able to connect with the VPS through TightVNC.
      REMEMBER: MAKE SURE TO ADD :1 BEHIND THE IP.

       
      This is how it should look:
      Once connected, you can download TRiBot/OSBuddy via the Iceweasel browser(similiar to Firefox).
       
      If you're unable to open TRiBot, try this:
       
      Looking for cheap VPS deals and don't know where to look? Check out Lowendbox, FinalHosting
    • By Proxy-Cheap
      Hello everyone,
      Proxy-cheap.com offers Residential proxies and Windows VPS
      Residential Proxies
      Residential proxies from 50+ countries and 300+ cities to choose from. With our Residential Proxy, you are assured to get the minimum amount of PVs and action blocks. $7 Entry
      10 IPs included
      $70/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $6 Advanced
      25 IPs included
      $150/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $5 Enterprise
      50 IPs included
      $250/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies Virtual Private Server (VPS)
      VPS stands for Virtual Private Server, and it’s practically another computer running 24/7 to which you can connect and do things as you would do on your home computer. You can connect to it from anywhere in the world and it continues to run and do it’s job even when you are not connected that is why it is a great idea to have one to run your tools on. $8 Small
      price per month up to 5 accounts Windows Server 2012 R2 80GB SSD Storage 2GB RAM 1 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $12 Business
      price per month up to 20 accounts Windows Server 2012 R2 160GB SSD Storage 4GB RAM 2 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $24 Premium
      price per month up to 70 accounts Windows Server 2012 R2 320GB SSD Storage 8GB RAM 3 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s
    • By Fluffee
      Fluffee's Server Setup 3.0
      As some of you may know, I released an automated server setup script a little over a year ago. Albeit that script worked well, I was never fully satisfied with it, as I found it to be kind of messy to use. As a result, I rewrote the script, and restructured it, to add more, and stronger support for the different versions of Debian, the different versions of CentOS and the different versions of Ubuntu. However, with so many different Operating Systems being supported, and many different server providers having different setups, it's hard for me to test every possible scenario on my own. Which is why I've been privately handing this script out, and am now publicly looking for help.

      What does the script do?
      Similar to my previous setup script, this script changes the SSH port and creates a new user for connecting and using the server and disables root SSH connections; it installs the latest version of TightVNC Server (1.3.10) and sets that up with the desired port and password. It installs JDK 102 (32 or 64 bit depending on the OS), and installs TRiBot and OSBuddy and sets up the appropriate .jar file associations.
      What operating systems does it support?
      - CentOS (6.x and 7.x) (32 and 64 bit)
      - Debian (7.x and 8.x) (32 and 64 bit)
      - Ubuntu (12.x, 14.x and 16.x) (32 and 64 bit)
      Does it work?
      As far as I know, yes it does in fact work, and it works well if I might add. However, given that I can't test every possible setup, there is the potential for differences and issues
      How do I run the script?
      Login as root to a fresh VPS/dedi running one of the supported operating systems. From there run the commands listed below and follow the onscreen instructions. For those who would like to see the script's code, it can be found on my bitbucket here. The commands to run are as follows:
      wget --no-check-cert https://bitbucket.org/teamfluffee/fluffees-server-setup/raw/add-shared-functions/fluffees-server-setup.sh && chmod +x fluffees-server-setup.sh && bash fluffees-server-setup.sh -v Version History
       
  • Our picks

    • Hi everyone,

      I'd like to thank everyone for their patience in this transition period. Since last week, we've worked out the remaining bugs with this integration.

      Some users have still been having issues with connecting their forums account to their Auth0 account. To resolve this, we've imported all forums accounts into Auth0.

      Unfortunately, the accounts which were imported today were using an unsupported password hashing algorithm. Hence, random passwords were set during the import.

      What does this mean for me?

      If you've previously linked your forums account to your Auth0 account, you don't have to do anything. Nothing changes for you.


      If you haven't logged in via our new login yet,

      Try logging in with your forums email address and the last password you used


      If you are unable to login, please use the "Forgot password" tool on the login page:
      Follow the instructions to reset your password
       
        • Like
      • 2 replies
    • Hello everyone,

      Last week we tried to roll out Auth0 Login, but we lost that battle. Now it's time to win the war!

      Important changes

      When logging into the client, you'll now have to enter your Auth0 account credentials instead of your forums credentials

      Note: 2FA is still handled through your forums account (for the time being)



      Changes for existing users

      You'll have to link your Auth0 account to your forums account here: https://tribot.org/forums/settings/login/?service=11


      Auth0 accounts have been created for most existing users. Please use your forums email address and password to login.



      Important notes

      Make sure to verify your email address upon creating a new Auth0 account


      When we mention your Auth0 account, we mean your account used for auth.tribot.org as displayed below
      • 71 replies
    • To better support the upcoming changes (TRiBot X, new repository), we're switching our login handler to Auth0. Instead of logging in with the standard form, you'll now be required to login through our Auth0 application.

      All existing accounts which have been used within approximately the past year have been imported into Auth0 using the same email and password combination which has been stored on the forums.

      What does this mean for users?

      Your account credentials are now even more securely stored


      You'll be able to login via Facebook, Google, and others in the future


      Is there anything users have to do differently now?

      Existing users: You'll have to login with the standard login, open your Account Settings, then link your Auth0 account


      New users: You'll be redirected to our Auth0 app (auth.tribot.org) where you'll be able to create an account


      Why was this change made?

      The new apps we are creating (such as the new repository) aren't able to use the forums to handle user logins


      To centralize all user accounts in one area


      To ensure that the client login doesn't go down when the forums are having problems


      To speed up our development


      Other considerations

      There's no documentation or official support for using Invision Community combined with Auth0, so there are still a few kinks we're working out


      We're in the works of creating an account management panel specifically for Auth0 accounts (ETA August)


      It's not possible to change email addresses for the time being (this will be resolved this August)


      Changing passwords is a weird process for the time being. To change your password, you'll have to use the "Don't remember your password" tool on the Auth0 login page
        • Like
      • 11 replies
    • Over the past month, we've been working hard on TRiBot's new repository - a much needed update. This change has been deemed necessary for TRiBot X, and will allow us to really speed up development of all aspects of TRiBot.

      Today we are going to share what we've been working on!


      Now you must be wondering what kind of features the new repository will have.... well, you'll have to be patient for a little while longer. We're still figuring out various technical aspects so we can't provide answers to all possible questions. We're also focusing on development rather than writing about it so that everyone can get access to our latest developments at lightning speed. I will however answer a few users' questions.

      We're planning on a release of this early to mid August, giving users some goodies before TRiBot X's release.

      Thank you all for being patient. I hope everyone is excited as much as I am!
        • Like
      • 17 replies
    • Over the past few months, I’ve been working diligently on a new project - TRiBot X. Everything has been written from the ground up, with all of the best practices of software engineering. Every aspect of TRiBot has been re-imagined to support three main goals: flexibility, useability, and reliability.
        • Like
      • 50 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...