Jump to content
Fluffee

[Tutorial] Setup Debian (VPS) (6.x, 7.x, 8.x) for Botting (32 and 64 Bit) LG Support Updated August 20th 2016

Recommended Posts

Big thank you to iFLUFFE got me up and running as my vps was a nightmare big thank you mate 100% trusted which is hard to find in the rs community these days.

Edited by wtf11
you can also add debian 8.2 to your title :)

Share this post


Link to post
Share on other sites

I would like to deeply thank you for all of your guides. They were all very helpful, especially this one.

It made me use a VPS, while I was debating with myself if I should. No regrets.

It is free (very nice of you) and very valueable. I appreciate this.

Used this on 8 VPS's so far.

Thanks!!!

Share this post


Link to post
Share on other sites
17 hours ago, Ozir said:

I would like to deeply thank you for all of your guides. They were all very helpful, especially this one.

It made me use a VPS, while I was debating with myself if I should. No regrets.

It is free (very nice of you) and very valueable. I appreciate this.

Used this on 8 VPS's so far.

Thanks!!!

I'm glad you've been able to benefit from them :)

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, skimmy said:

Another satisfied guide follower! Great job fluffee.

 

If you have a VPS and need to set it up, you just need to follow this step by step and you'll have bots up and running in no time. 

 

Thanks!

 

did you use debian 7? i tried this with debian 8 and it only kinda worked. everything but the desktop worked

Share this post


Link to post
Share on other sites

Hey Guys! So if you're experiencing the issue of 404 NOT FOUND.

Heres the steps to fix it:

Replace the link in the script and rename the installation file.

To help you out, heres the working code. (Still iFluffe's dropbox. Not mine)

(64bit)

apt-get update && apt-get install -y sudo wget && wget --no-check-cert 'https://www.dropbox.com/s/p2ivlkkvd5p3aig/install64.sh?dl=0#' && chmod +x install64.sh?dl=0 && ./install64.sh?dl=0 

PM Me for 32bit.

 

@iFluffee please add this to ur front page so that people can use it properly :)

Thanks.

 

P.S. Would u mind if i create a new thread about how to set up with ur bash script? Thanks

Share this post


Link to post
Share on other sites
4 hours ago, ZafyTv said:

Hey Guys! So if you're experiencing the issue of 404 NOT FOUND.

Heres the steps to fix it:

Replace the link in the script and rename the installation file.

To help you out, heres the working code. (Still iFluffe's dropbox. Not mine)

 

How can people prove that https://www.dropbox.com/s/p2ivlkkvd5p3aig/ belongs to iFluffee?

Share this post


Link to post
Share on other sites
1 minute ago, Prankxter said:

How can people prove that https://www.dropbox.com/s/p2ivlkkvd5p3aig/ belongs to iFluffee?

Because its the link in his thread. The (32bit) (64bit) one..

Anyways, i found out there were more links in the bash script which were old and useless so the only person who can fix is Fluffee.

Am making my own tutorial soon.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By TRiLeZ
      This release will:
      Fix Settings UI placement bug Fix game object location bug Fix small layout bug making the client shift up and down Fix client crashing bug where loading the client with a small display area will cause the client to crash Fix annoying Linux bug relating to painting events and peers Fix settings saving bug where settings are saved to disk more often than they should Fix RSInterface#isBeingDrawn bug affecting a limited amount of people Drop Java 1.7 bytecode version for 1.8 Important: Since the downloadable RS client uses Java 7, it will no longer be compatible with Looking Glass. To make up for this, we will add support for using other clients such as RuneLite (at a later date). This change was necessary to allow us to use Java 8 syntax. It also paves the way for Java 9/10/11 support. Edit: Release 9.312_1 will:
      Fix LG GZIP error Fix Client Starter for Linux 🙌
    • By Fluffee
      How to Run Most Applications Through a Proxy on both Windows and Linux
      Windows Instructions
      Note: Chrome and Firefox portable do not work with WideCap.
      1. Download WideCap from here (http://widecap.ru/en/download/)
      2. Run through the installer, and launch WideCap, you should see this screen.

      3.Go ahead and click on Settings (First option under the Widecap section on the left hand side). Then uncheck the box that says Run with system startup.

      4. Now go ahead and click on New proxy (First option under the proxies section on the left hand side).
      5.You should see this screen, in the top field enter the IP address and port (IP:Port format). Confirm that the protocol is set to SOCKS v5 (which is the default), and tick the box for Authentication if necessary. If using an authenticated proxy, enter your username in the login field, and obviously your password in the password field. Then hit the Create New button, next to Chain, and type in a name for your Proxy, then Hit OK

      6. Now that you're back to the main screen, click on the Proxy List section (Second option under the proxies section on the left hand side). Right click on your newly added proxy, and click check selected, to make sure you entered all the information correctly. If the status field rolls over to OK, you're good to go, and can move on to the next step

      7. Find WideCap in your System tray, right click, and uncheck the box that says Enable Widecap.

      8. Click on View Programs (Second option under the Programs section on the left hand side). Then drag and drop the icon for the application you want to proxify (run behind a proxy) into WideCap. WideCap supports the proxifying of both .exe and .jar files!

      9. Right Click on your newly added program, and click on Modify Application, you should see a similar screen depending on what you added. Then click on Create New... (to create a new rule)

      10. In the Chain tab, select the Proxy Chain you created earlier, then under the Main tab, give your new rule a name and hit OK. Then Hit OK again on the modify Application screen.

      11. Hit Apply and OK in the main window of WideCap, and then find it in your System Tray again, but this time click the box to Enable Widecap
      12.Open your Proxified application, and check to see if the proxy worked! If your IP is changed, congrats, you've got WideCap working!
      Linux Instructions (Based off of a Debian Installation)
      1. Open a new terminal and run this command
      sudo apt-get update && sudo apt-get install -y proxychains 2. Now that proxychains is installed, we're going to go ahead and create a user specific configuration file. To do this, we'll make a directory, then copy the standard proxychains configuration file to it and change the ownership of the configuration file to your user. Run the command below as your user.
      mkdir ~/.proxychains/ && cp /etc/proxychains.conf ~/.proxychains/proxychains.conf && sudo chown ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.conf && sudo chgrp ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.confroxychains.conf 3. Once the command is finished, open the proxychains config file in your favorite Linux text editor, for ease of use, I'm going to use nano. To install nano run this command
      sudo apt-get install -y nano To edit the proxychains config file, with nano, run this command
      nano ~/.proxychains/proxychains.conf 4. Now, what you'll want to do is scroll all the way down to the bottom, and you should see something like this

      That last line that says
      socks4    127.0.0.1    9050
      That's the line we'll be editing. Firstly, we'll go ahead and erase everything on that line, don't worry we'll put it back. The format for the configuration file is
      Proxy Type(lowercase) (tab) IP address (tab) Port (tab) Username (tab) Password
      Therefore if your proxy was a Socks5 proxy, with an IP of 192.168.1.1, a port of 1080, a username of Fluffee and a password of TRiBot, your final line would look like this:
      socks5    192.168.1.1    1080    Fluffee    TRiBot
      So, go ahead and modify your last line to fit your own proxy and then hit Control+X to exit, and then hit Y to save (instructions are based off of using nano to edit the file).
      5. Proxychains is now setup, but how do you use it? Go ahead and VNC into your Server and open a terminal, or open a Terminal inside your Desktop Environment (if using Linux installed on a PC). From there run the command proxychains followed by the application you would like to run, or the path to the application. For example, try running, if you have Firefox installed:
      proxychains firefox Then navigate to an IP checking website, and see if your proxy worked!
      That concludes the tutorial on how to use a proxy with Oldschool or any browser, on both Linux and Windows. If you have any questions feel free to post in the comments!
    • By r0ot
      I've nearly got TRiBot running on an Ubuntu machine but have run into an error with the loader.  When I run the loader for the first time and it populates the dependencies folder, the file togl.dll get's downloaded instead of libTOGL.so which TRiBot.jar eventually looks for.  Error looks like this:
      Loading TOGL Loading: /home/<user>/.tribot/dependancies/libTOGL.so Exception in thread "AWT-EventQueue-1" java.lang.UnsatisfiedLinkError: Can't load library /home/<user>/.tribot/dependancies/ibTOGL.so Inside my dependencies folder there's a file called togl.dll.  The bug report forum says I need to post here before I can post there.
    • By YoHoJo
      More Runescape Botting Guides at https://RSBotSpot.com
      Join our Runescape Botting Discord chat channel here
      Original/Updated Article here at RSBotSpot
      This guide contains affiliate links
      How to Unlock your Runescape Bot Account
      If you’ve tried your hand at goldfarming, you’ve probably experienced getting some of your accounts getting locked shorty after tutorial island.
      Locked Runescape Account
      After seeing this, many people assume the account is banned or useless, and continue creating more accounts. But that’s not the case! This guide will cover how to get your Runescape bot account unlocked (not unbanned) and continue botting.
      Account locks are a common occurrence for people who use proxies for Runescape botting. In my experience, this does not mean the proxy is flagged, and I’m able to bot successfully after recovery.
      Our Favorite Runescape Botting Proxy Providers
      We've tested and had great results with Runescape botting proxies from:
      Blazing Proxy (Use code RSBOTSPOT to save 5% recurring!)(CHEAPEST) Virmach (Use code SAVE20 to save 20% on your first order!) Proxy Fish (Use code OSBOT20 to save 20% on your first order!) Your Private Proxy How to Unlock your Runescape Botting Account
      1. Log into the Locked Account
      Load up Runescape and attempt to log into the account. Then click the “Forgotten your password?” link, and follow the prompts.
      Forgot Password Link
       
      2. Complete the Recovery Form
      Fill out the recovery form to the best of your ability.
      Runescape Account Recovery Form
      I highly recommend using the same IP you created the account on for this step. Check out our how to register your runescape account through a proxy guide for info on that.
      Tip: To find out your Internet Service Provider use a tool like whatsmyip.
      3. Visit Account Recovery Link
      Visit the account recovery link in your email from Runescape, and set a new password.
      Runescape Account Recovery Unlock Email
      Recovery email is not instant. Typically comes well within 24 hours
      That’s it, you’re done!
      Your account is now unlocked and good to go, Happy Botting!
      Our Favorite Runescape Botting Proxy Providers
      We've tested and had great results with Runescape botting proxies from:
      Blazing Proxy (Use code RSBOTSPOT to save 5% recurring!)(CHEAPEST) Virmach (Use code SAVE20 to save 20% on your first order!) Proxy Fish (Use code OSBOT20 to save 20% on your first order!) Your Private Proxy Our Other Guides:
      All About Proxies for Runescape Botting How to Create and Register Runescape Bot Accounts Through a Proxy How to Use Proxies With TRiBot How to Expand your Goldfarm with a Botting VPS
    • By Fluffee
      Fluffee's Server Setup 2.0 [BETA]
      As some of you may know, I released an automated server setup script a little over a year ago. Albeit that script worked well, I was never fully satisfied with it, as I found it to be kind of messy to use. As a result, I rewrote the script, and restructured it, to add more, and stronger support for the different versions of Debian, the different versions of CentOS and the different versions of Ubuntu. However, with so many different Operating Systems being supported, and many different server providers having different setups, it's hard for me to test every possible scenario on my own. Which is why I've been privately handing this script out, and am now publicly looking for help.

      What does the script do?
      Similar to my previous setup script, this script changes the SSH port and creates a new user for connecting and using the server and disables root SSH connections; it installs the latest version of TightVNC Server (1.3.10) and sets that up with the desired port and password. It installs JDK 102 (32 or 64 bit depending on the OS), and installs TRiBot and OSBuddy and sets up the appropriate .jar file associations.
      What operating systems does it support?
      - CentOS (6.x and 7.x) (32 and 64 bit)
      - Debian (7.x and 8.x) (32 and 64 bit)
      - Ubuntu (12.x, 14.x and 16.x) (32 and 64 bit)
      Does it work?
      As far as I know, yes it does in fact work, and it works well if I might add. However, given that I can't test every possible setup, there is the potential for differences and issues, which is why I need help.
      I want to beta test, how can I help?
      The next time you setup a server, or if you just want to reinstall your old one, use this new script and let me know if you encounter any issues or things that you think are missing. Ideally, after you answer the questions the script prompts you for, you shouldn't have to touch the keyboard again. Therefore, if during installation the script prompts you for any kind of input that isn't the first few questions, please let me know as this is probably not supposed to happen. Also, if things don't work, like TRiBot doesn't open, there's no internet browser, LG won't hook, etc. make me aware of those issues as well, so I can try and fix them!
      I've found a bug, what do you need from me?
      A few things, I'll need the operating system and bit type and a description of the bug. I may ask you for SSH access to the server, as well as ask you to reinstall the server a few times, while I attempt to troubleshoot the issue. The issues may only arise on your server, so I might not be able to recreate the issue on my end, as my hosting provider may have a different server setup than your's. I've added in a bug report format below which would be the best way to report a bug, but simply shooting me a PM or messaging me on Skype also work, assuming you're willing to allow me to troubleshoot.
       
       
      How do I run the script?
      Login as root to a fresh VPS/dedi running one of the supported operating systems. From there run the commands listed below and follow the onscreen instructions. For those who would like to see the script's code, it can be found on my github here. The commands to run are as follows:
      wget --no-check-cert https://bitbucket.org/Fluffee/fluffees-server-setup/raw/master/fluffees-server-setup.sh && chmod +x fluffees-server-setup.sh && ./fluffees-server-setup.sh -v Version History
       
  • Our picks

    • This release will:

      Fix key event handling issue


      Fix other event handling issue


      Fix RSServer hook


      Update world hopper to have it use OCR, thanks to Todd


      Use proper disposal of old Graphics objects


      Reformat code


      Rearrange code


      Organize code imports


      Apply around 8000 automated code refactorings


      Make preparations for Java 9


      Fix 11 various bugs


      Add more reliable debugging support


      Fix mouseEntered/Exited event dispatching bug


      Fix minimap walking bug where it opens the map


      Fix broken hooks for today's game update
        • Thanks
        • Like
      • 46 replies
    • This update will:

      Fix GE inventory item positioning bug


      Fix broken object hooks
        • Like
      • 27 replies
    • This release will:

      Fix some ClosedChannelException bug


      Fix bug in RSObject#getAllTiles


      Add game tab support for "Kourend Favour"
        • Like
      • 15 replies
    • This release will:

      Fix Settings UI placement bug


      Fix game object location bug


      Fix small layout bug making the client shift up and down


      Fix client crashing bug where loading the client with a small display area will cause the client to crash


      Fix annoying Linux bug relating to painting events and peers


      Fix settings saving bug where settings are saved to disk more often than they should


      Fix RSInterface#isBeingDrawn bug affecting a limited amount of people


      Drop Java 1.7 bytecode version for 1.8


      Important: Since the downloadable RS client uses Java 7, it will no longer be compatible with Looking Glass. To make up for this, we will add support for using other clients such as RuneLite (at a later date).


      This change was necessary to allow us to use Java 8 syntax. It also paves the way for Java 9/10/11 support.
        • Like
      • 40 replies
    • This update will:

      Fix the RSMenuNode bug which also fixes the bug with bank opening


      Fix the incorrect object positions bug


      Fix and re-enable the LG Objects API Accelerator


      Fix the RSObject#getAllTiles bug
        • Like
      • 22 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×