Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Pauwelz

ıllıllı Pauwelz' VPS Services | Setup | Management | Servers ıllıllı

Recommended Posts

Because a few users asked me to post on this board as well, here goes nothing. :)

Intro

Have you ever encountered any of the following:

  • Your parents shut down your PC while you were botting?
  • You left your PC running in your room, but you couldn't sleep because it was too noisy?
  • You wanted to check up on your bots, but you're not at home?
  • You want to run a lot of bots, but your PC can't handle it?
  • You got perm banned, and wanted to say you were hacked?
  • ...
If you answered "yes" to any of the above questions, I have some excellent advice for you: BUY A VPS

"Easier said then done.", you might say. While that is true, I'm here to help you out, so be sure to check out the plans below.

Services offered

Setup service

What is this?

You already have a VPS server bought from the provider of your choosing, and just want me to do the setup.

What is included?

  • Installation of the Linux distribution
  • Installation and setup of desktop environment
  • Installation of remote desktop service
  • Installation of correct Java versions
  • Installation of desired / required bots
  • Instructions on how to update installed bots.
How much does it cost?

This will cost you $5 / 10M RS3 / 2M 07.

Server Management

What is this?

This is the same as as the setup service above, but I will also maintain the server for you.

What is included?

  • Same as above
  • Daily management (security checks, updates to installed software, updates to bots)
  • Support in case of issues with connectivity, ...
How much does it cost?

The first month is $5 / 10M RS3 / 2M 07, after it's $2.5 / 5M RS3 / 1M 07 per month.

Full Server

What is this?

You don't have to worry about picking a VPS provider, I will do all the work for you.

What is included?

  • Same as above
  • I will order the right VPS server for you after a small talk
  • I will do all communication towards the VPS hosting provider in case of problems that I cannot resolve myself (hardware related)
How much does it cost?

The first month is $10, after it's $9 per month.

Contact

So you have decided to go on and buy the setup service / management service? Or you just want more information?

Contact me on Skype: pb_pauwelz

addskype.png?u=pb_pauwelz

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By MNO
      We offer 3 packages, all packages come with the following things pre-installed:
      Windows 10 Java Google Chrome Firefox Dreambot You will get acces through a Remote Desktop Connection (rdp) which we will setup for you.
      Ordering can be done through discord:
      Server: https://discord.gg/jzwNzED
      User: Nex#8648 (UID: 109992979057373184)
      We accept most crypto & rsgp. (Paypal for trusted users)
      We currently offer the following packages:
      Bronze Server
      CPU: Intel Core i7-4770  (or equiv) RAM: 8 GB  Can run: ~12 bots $40/Month
      Iron Server
      CPU: Intel Xeon E3-1275V6  (or equiv) RAM: 64 GB  Can run: ~17 bots $60/Month
      Steel Server
      CPU: AMD Ryzen 7 1700X (or equiv) RAM: 64 GB  Can run: ~25 bots $80/Month  
      TOS:
      1) You will not use this service for any illegal activity.
      2) You will notify us in time for a renewal of service's (>1 week ahead).
      3) All payments are final and we offer no refunds.
      4) By using our service you agree to these terms.
      Breaking any of these will result in instant termination of service with NO refund.
       
    • By D Bolter
      Accepting OS GP ($0.5/m), Skrill, Crypto (coinbase), PayPal (friends/family/gift), Venmo
      prices are for 30 days
      Residential Proxies are $15 each
      Discord (preferred): ash#2176
      Skype: dboltertemp
       
      Terms of Service:
       
       
    • By Proxy-Cheap
      Hello everyone,
      Proxy-cheap.com offers Residential proxies and Windows VPS
      Residential Proxies
      Residential proxies from 50+ countries and 300+ cities to choose from. With our Residential Proxy, you are assured to get the minimum amount of PVs and action blocks. $7 Entry
      10 IPs included
      $70/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $6 Advanced
      25 IPs included
      $150/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $5 Enterprise
      50 IPs included
      $250/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies Virtual Private Server (VPS)
      VPS stands for Virtual Private Server, and it’s practically another computer running 24/7 to which you can connect and do things as you would do on your home computer. You can connect to it from anywhere in the world and it continues to run and do it’s job even when you are not connected that is why it is a great idea to have one to run your tools on. $8 Small
      price per month up to 5 accounts Windows Server 2012 R2 80GB SSD Storage 2GB RAM 1 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $12 Business
      price per month up to 20 accounts Windows Server 2012 R2 160GB SSD Storage 4GB RAM 2 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $24 Premium
      price per month up to 70 accounts Windows Server 2012 R2 320GB SSD Storage 8GB RAM 3 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s
    • By Fluffee
      Fluffee's Server Setup 3.0
      As some of you may know, I released an automated server setup script a little over a year ago. Albeit that script worked well, I was never fully satisfied with it, as I found it to be kind of messy to use. As a result, I rewrote the script, and restructured it, to add more, and stronger support for the different versions of Debian, the different versions of CentOS and the different versions of Ubuntu. However, with so many different Operating Systems being supported, and many different server providers having different setups, it's hard for me to test every possible scenario on my own. Which is why I've been privately handing this script out, and am now publicly looking for help.

      What does the script do?
      Similar to my previous setup script, this script changes the SSH port and creates a new user for connecting and using the server and disables root SSH connections; it installs the latest version of TightVNC Server (1.3.10) and sets that up with the desired port and password. It installs JDK 102 (32 or 64 bit depending on the OS), and installs TRiBot and OSBuddy and sets up the appropriate .jar file associations.
      What operating systems does it support?
      - CentOS (6.x and 7.x) (32 and 64 bit)
      - Debian (7.x and 8.x) (32 and 64 bit)
      - Ubuntu (12.x, 14.x and 16.x) (32 and 64 bit)
      Does it work?
      As far as I know, yes it does in fact work, and it works well if I might add. However, given that I can't test every possible setup, there is the potential for differences and issues
      How do I run the script?
      Login as root to a fresh VPS/dedi running one of the supported operating systems. From there run the commands listed below and follow the onscreen instructions. For those who would like to see the script's code, it can be found on my bitbucket here. The commands to run are as follows:
      wget --no-check-cert https://bitbucket.org/teamfluffee/fluffees-server-setup/raw/add-shared-functions/fluffees-server-setup.sh && chmod +x fluffees-server-setup.sh && bash fluffees-server-setup.sh -v Version History
       
    • By voidk5
      Hey guys, I'm facing some problems with my Debian 8 VPS, currently I'm not able to install Java 8, I was using this as reference https://tecadmin.net/install-java-8-on-debian/ but as it says "IMPORTANT: Java 8 is no longer available to download publically. You can use below link to install Java 11."  Java 8 can't be downloaded anymore, so I tried to use Java 11, but TRiBot doesn't work with it. 
      Anyone can have with this? 
      I'll give more info if required.
       
       
    • By acezeps
      Hey tribot, just was looking for a bit of help with the whole vps goldfarming method. 
      Does anyone have any experience with connecting your screen to the vps desktop? I followed a tribot guide, and did everything correctly and still could not connect with no one to help me. 
      I am expecting to be able to run 2-3 accounts per vps, is that possible or should i stick to 1-2?
      Honestly, just looking for any sort of help on starting a vps based gold farm, and im tired of being promoted shit vps websites
       
    • By TonyBotFarm
      Hi.
      Im here because I cant found solution for my problem.
      When I run Tribot in my VPS, The Tribot client closes after the first 3 minutes. My VPS have OS Ubuntu 14.04
      I was instal Java 8. Oracle, JDK & JRE
    • By Fredwin
      Hi,
      I am looking for a good vps provider to run tribot based in the UK? Anyone got any ideas? 
  • Our picks

    • [CONTEST ANNOUNCEMENT] 2019 Botter's Choice Awards
      2019 Botter’s Choice Awards

      To celebrate the launch of our TRiBot Official RuneScape Bot Blog,

      we’re doing a giveaway! 

      The TRiBot Official RuneScape Bot Blog: 

      Teaching you how to do more advanced botting, faster.
      Contest Details

      Prize: 3 winners will be selected to win 25 TRiBot credits.

      How to enter:

      Respond to this forum post by November 12th tagging the thread for: 

      Your favorite script

      Provide a brief explanation (1-2 sentences) why you think that script should be put in the top 5. 

      Who can enter?

      Botter’s who are not currently scripters. Sorry scripters, the people are going to vote. Your contest is here.

      The top 5 in each category will be showcased on our TRiBot Official RuneScape Bot Blog in a “People’s Choice” section and promoted across the TRiBot website. 

      -- Credits will be awarded based on thoughtfulness and humor -- 

      Bonus points

      Use a meme in your explanation. Because we all love memes.

      *no purchase necessary. Winners will be announced on Friday, November 15, 2019 at 4:00 p.m. on our News and Announcements forum. 

      -- Vote Below -- 
        • Like
      • 28 replies
    • [READ TO THE END FOR A TEASER]

      I've noticed some new TRiBotters have had some troubles finding out sources of how to do certain things, such as using advanced scripts and often get lost in the forums.

      We are still getting posts asking where to start, what to do, recommended scripts, etc. 

      As many of you know, I am new to the team, and had troubles myself learning how to bot, let alone script. 

      So, what our team decided to do was make it easier to learn how to bot, how to script, and just become an overall better botter and scripter faster. 

      As some of you might have seen, I've posted 3 new blogs, you can check it out by clicking on the following picture or here.


      These first 3 blogs are the first of many blogs that will be TRiBot official. They are encouraged to be challenged, improved upon and act as A Best Practices Guide for Botters.

      What information would you like to see in the blogs?

      👇 [TEASER] 👇

      .

      .

      .

      We are going to be hosting a  CONTEST  this  OCTOBER.

      Its scary to think how soon you'll find out.👻

      Stay tuned.


      - RileyZ
      • 8 replies
    • Today marks a big day for TRiBot! To make it easier for users to use TRiBot, we've created installers available for every platform! These installers are all bundled with the latest version of OpenJDK 1.8 (Java 😎, which is LG compatible.

      Using TRiBot is now easy. Simply download the installer for your platform, install TRiBot, and run it. The TRiBot Loader will correctly identify the bundled JDK so there's no need to change the Java selection.

      Windows

      EXE installer: TRiBot-windows-x64-4.0.3.exe


      MSI installer: TRiBot-windows-x64-4.0.3.msi


      Portable version: TRiBot-windows-x64-4.0.3.zip


      Mac OS

      Installer: TRiBot-macos-4.0.3.dmg


      Portable version: TRiBot-macos-4.0.3.tgz


      Unix/Linux

      Installer: TRiBot-unix-4.0.3.sh


      RPM installer (CentOS/Fedora): TRiBot-linux-4.0.3.rpm


      DEB installer (Debian): TRiBot-linux-4.0.3.deb


      Portable version: TRiBot-unix-4.0.3.tar.gz


      Platform Independent

      JAR file: tribot-loader-4.0.3.jar


      Note that this jar file does not include the bundled JDK.



      Windows and Mac OS users may notice a warning message stating that the installer/application is un-recognized or un-trusted. Please ignore this message and proceed with running the installer/application. We need to acquire a code signing certificate so that we can sign the installers letting the operating system know that these files can be trusted. It will take a week or more to acquire one, so please hold tight.

      Other notable changes to the TRiBot Loader:

      Support getting the version from OpenJDK distributions


      Add check for bundled JDK


      Copy OpenJDK tools.jar to the bundled JDK if not present


      Set the current java as the first available list entry


      Ignore Java versions which are symbolic links


      Make the bundled JDK the preferred Java version


      Update icon images


      Reduce the number of HTTP calls
      • 26 replies
    • TRiBot is looking to improve a lot of its customer relationship management, customer on boarding process, customer experience, design elements, community engagement and pretty much everything else you can imagine when it comes to marketing.

      Our goal: To ensure that the marketing done TRULY reflects the experience and does not shine an inaccurate light on what TRiBot is lacking in.

      So I ask, what do you love about TRiBot and what do you hate about TRiBot? What does O S Bot, Rune M8, PowR Bot and Dre amBot do better? (yes I purposely didn't spell it right 😂).

      Love, 

      RileyZ
      • 18 replies
    • Hello TRiBot,

      Today we have a significant release that has been in the works for the last month addressing several key issues, features and bugs in the backlog.

      With these changes, we are also including a new TRiBot Loader which will allow you to select any version that is released. This adds the flexibility of allowing you to revert to a previous version should an issue arise, run development only builds, view an accurate change log between versions etc. we are very proud to offer this feature and think it will add a lot more functionality down the road as we continue to release new versions.

      These changes include 80+ commits by our development team, a list of them is summarized below and also available for your viewing pleasure in the new TRiBot Loader.

      In addition, we have taken additional steps to improve as a development team by adding continuous integration and deployment into our workflow to assist in delivering timely releases such as bug fixes as well as new features on a weekly basis depending on our development cycle.
        • Thanks
      • 39 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...