Jump to content
Sign in to follow this  
hitforhelp

Proxy Setting Support On Client.

Recommended Posts

Would it be possible to have proxy support added directly into the client?

 

This would allow users to have a unique ip for each client that was being run. Thus potentially increasing the safety of users should they wish to use it.

 

Many programs use proxy support adding this could give tribot another leading edge against the competition and possibly lower bot ban rates.

 

Anyone else be interested in a system like this?

  • Like 3

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Similar Content

    • By Worthy
      Welcome to Worthy Scripts
      |w| Zulrah Slayer
      Features
      V2 HIGHLIGHTED FEATURES (this script has been fully rewritten) LG Compatible The script now functions smoothly with TRiBot's beta feature Looking Glass Unlimited multi-kill performance The bot will determine if it has enough supplies to start another Zulrah battle after killing the boss the previous time. It can continue doing this until it runs out of food, allowing a single, double, triple, or quad+ kill. Dynamically prioritized combat framework Zulrah fight very CPU efficient! Travel method support update Zul-Andra teleport scrolls Charter Travel Camelot port [via Camelot teleports] Catherby port [via Catherby port lunar teleport] Khazard port [via Khazard port lunar teleport] Fairy Ring Network Fairy ring via Varrock Teleport Fairy ring via Quest Cape Fairy ring via Ardougne Cloak Fairy ring via Salve Graveyard Teleport Fairy ring via slayer ring Fairy ring via House Teleport (mounted) Ornate pool support If so, the script will use castle wars bank instead Jewelry box support If so, the script will use a custom kill / bank loop (with no Ring of Dueling) Or use another player's house! Ability to input a list of names. There are so many customizeable options for every travel method I recommend checking out the documentation thread for a full detailed explanation if you are considering purchasing.
        As of 4/21/2018 the bot now supports resizeable mode!
      This is one of the most human-like antibans any botting client can offer.
        Set range and magic sets  Also supports an optional mage only mode Swaps gear and prays efficiently Prayer flickering for JAD phases Calculates zulrah drop earnings Deathwalk - SAFE BOSS: never lose your items on death Recharges Trident of the Seas, Trident of the Swamp, Toxic Blowpipe, Serpentine Helm (all forms) Tracks arrow count, charge count, and ammo count for all special weapons Repairs barrows armor  Reorganizes inventory! Drags and drops items like a real player Supports serpentine helmets Supports cooked karambwans Supports special attacks Supports ring of suffering Supports prayer potions or super restores Supports stamina potions Supports summer pies for agility boost Supports imbued heart Supports random world hopping Supports new rigour and augury prayers Supports vengeance spell with optimal timing Ability to use rune pouch Requires Earth, Death, and Astral runes Picks up and banks the Zulrah pet Dodges melee phase attacks Sexy loot table. Analyze your drops! Hiscores system (below) Dynamic signatures (below) Automatic screenshot progress report system every hour
      Detailed session log dump. Keep track of exactly how all your bots do!
      ABC V2 Level 10  
      Official Discord Discussion
      http://discord.gg/yeCVsad
       
      External Documentation Thread
      I have moved a large part of the documentation to an external thread which contains how to:
      Create an armor preset Decide what gear to wear Set up the GUI to be tailored to your RuneScape character Start the script correctly Other notable information If you are considering purchasing this script, read the documentation thread.

       
      Proggies





      More: http://imgur.com/a/HNaQZ
      Even more: http://imgur.com/a/lsh82

      Requirements
      - 80 to 85+ range/magic (85+ magic necessary as it is the most important stat). If using LG, have at least 85 of both.
      - High defence and hp (>= 70 for barrows), HP recommend at least 75
      - 43+ prayer
      - Regicide, Underground pass, Biohazard, and Plague City required

      Live Hiscores System
      V1 Hiscores (OLD) V2 Hiscores (CURRENT)
      Dynamic Signatures:
      Automatically load an image of your current stats, which updates as you bot!
      http://www.worthy.rs/tribot-php/ZulrahSlayerV2/sigs/USERNAME_HERE.png Just replace USERNAME_HERE with your TRiBot username (make sure it is all lowercase), and copy and paste it the image link itself into your signature here:
       (should be on the bottom right of your signature edit box).


      Pricing
      The Casual Botter
      - 14.99 CREDITS | 1 auth for 2 weeks
      - 24.99 CREDITS | 1 auth for 1 month

      Gold Farmer's Discount
      - 79.99 CREDITS | 5 auths for 1 month
      - 134.99 CREDITS | 10 auths for 1 month
      - 174.99 CREDITS | 15 auths for 1 month
      - 224.99 CREDITS | 25 auths for 1 month
      - 299.99 CREDITS | 50 auths for 1 month
      Note: the number of auths designates the number of RS accounts you can run on this script at a given time.


      Click below to purchase or for FREE TWO HOUR TRIAL:

       
      Regards,
      Worthy
    • By Thebot13
      Originally Posted by TRiLeZ  So having something like this: Code: JarURLConnection clientConnection = ((JarURLConnection) getJarURL( world).openConnection()); clientConnection.addRequestProperty("Protocol", "HTTP/1.1"); clientConnection.addRequestProperty("Connection", "keep-alive"); clientConnection.addRequestProperty("Keep-Alive", "200"); clientConnection.addRequestProperty("Referrer", "-"); clientConnection.addRequestProperty("User-Agent", "Mozilla/5.0 (" + System.getProperty("os.name") + " " + System.getProperty("os.version") + ") Java/" + System.getProperty("java.version")); classLoader = AppletClassLoader .newInstance(new URL[] { clientConnection.getJarFileURL() }); Would disguise a bot accessing the loader from the runescape website as a web browser, and it would be undetectable, right? unless jagex analyzes the content of your hdd/ram, which Mopar says they 'could' do.
      ^
      @TRiLeZ "The developer of OSB worked at Jagex"
      If Jagex is able to scan through your running tasks while using the official client, and unsafe to do so,  with their anti-tamper detection software if they worked together with the former employee of Jagex to make Osbuddy, (which I wouldn't doubt they made an agreement to share data privilege due to copyright issues) Wouldn't that allow them to do the same through Osbuddy to detect running tasks etc? even if it's hooked through the LG?
       
       
       
    • By Thebot13
      I think I may have figured out a technique used by the software botwatch they may look at a new account since the new account is at an extremely low ranking of several 100,000 if you continuously train on that account including other methods it uses to detect it must go by ranks as the most primary method of finding and flagging new accounts that are being botted.
       
      This also concerns mains that are botted let's say if you go over an increase of 80,000+ ranks in 24 hours. Then the botWatch system flags or account for a mod to look at. 
       
      I suggest tracking you account closely on CrystalMathlabs and watch your ranking. I would suggest that you stay under the 30,000 rank increase in any given skill
       
      **EDIT This is purely thought based, noone knows how the botwatch programme detects botters.
    • By Fluffee
      How to Run Most Applications Through a Proxy on both Windows and Linux
      Windows Instructions
      Note: Chrome and Firefox portable do not work with WideCap.
      1. Download WideCap from here (http://widecap.ru/en/download/)
      2. Run through the installer, and launch WideCap, you should see this screen.

      3.Go ahead and click on Settings (First option under the Widecap section on the left hand side). Then uncheck the box that says Run with system startup.

      4. Now go ahead and click on New proxy (First option under the proxies section on the left hand side).
      5.You should see this screen, in the top field enter the IP address and port (IP:Port format). Confirm that the protocol is set to SOCKS v5 (which is the default), and tick the box for Authentication if necessary. If using an authenticated proxy, enter your username in the login field, and obviously your password in the password field. Then hit the Create New button, next to Chain, and type in a name for your Proxy, then Hit OK

      6. Now that you're back to the main screen, click on the Proxy List section (Second option under the proxies section on the left hand side). Right click on your newly added proxy, and click check selected, to make sure you entered all the information correctly. If the status field rolls over to OK, you're good to go, and can move on to the next step

      7. Find WideCap in your System tray, right click, and uncheck the box that says Enable Widecap.

      8. Click on View Programs (Second option under the Programs section on the left hand side). Then drag and drop the icon for the application you want to proxify (run behind a proxy) into WideCap. WideCap supports the proxifying of both .exe and .jar files!

      9. Right Click on your newly added program, and click on Modify Application, you should see a similar screen depending on what you added. Then click on Create New... (to create a new rule)

      10. In the Chain tab, select the Proxy Chain you created earlier, then under the Main tab, give your new rule a name and hit OK. Then Hit OK again on the modify Application screen.

      11. Hit Apply and OK in the main window of WideCap, and then find it in your System Tray again, but this time click the box to Enable Widecap
      12.Open your Proxified application, and check to see if the proxy worked! If your IP is changed, congrats, you've got WideCap working!
      Linux Instructions (Based off of a Debian Installation)
      1. Open a new terminal and run this command
      sudo apt-get update && sudo apt-get install -y proxychains 2. Now that proxychains is installed, we're going to go ahead and create a user specific configuration file. To do this, we'll make a directory, then copy the standard proxychains configuration file to it and change the ownership of the configuration file to your user. Run the command below as your user.
      mkdir ~/.proxychains/ && cp /etc/proxychains.conf ~/.proxychains/proxychains.conf && sudo chown ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.conf && sudo chgrp ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.confroxychains.conf 3. Once the command is finished, open the proxychains config file in your favorite Linux text editor, for ease of use, I'm going to use nano. To install nano run this command
      sudo apt-get install -y nano To edit the proxychains config file, with nano, run this command
      nano ~/.proxychains/proxychains.conf 4. Now, what you'll want to do is scroll all the way down to the bottom, and you should see something like this

      That last line that says
      socks4    127.0.0.1    9050
      That's the line we'll be editing. Firstly, we'll go ahead and erase everything on that line, don't worry we'll put it back. The format for the configuration file is
      Proxy Type(lowercase) (tab) IP address (tab) Port (tab) Username (tab) Password
      Therefore if your proxy was a Socks5 proxy, with an IP of 192.168.1.1, a port of 1080, a username of Fluffee and a password of TRiBot, your final line would look like this:
      socks5    192.168.1.1    1080    Fluffee    TRiBot
      So, go ahead and modify your last line to fit your own proxy and then hit Control+X to exit, and then hit Y to save (instructions are based off of using nano to edit the file).
      5. Proxychains is now setup, but how do you use it? Go ahead and VNC into your Server and open a terminal, or open a Terminal inside your Desktop Environment (if using Linux installed on a PC). From there run the command proxychains followed by the application you would like to run, or the path to the application. For example, try running, if you have Firefox installed:
      proxychains firefox Then navigate to an IP checking website, and see if your proxy worked!
      That concludes the tutorial on how to use a proxy with Oldschool or any browser, on both Linux and Windows. If you have any questions feel free to post in the comments!
    • By triram33
      can somebody tell me if you need a proxy to bot safely on two different accounts at the same time with vip / premium or does tribot do that for you
      (botting noob)
    • By adog75
      Hi Tribot,
      About to purchase proxies from blazing proxies. Anyone have a promo code they'd like to share ^^? Thanks in advance
  • Our picks

    • This update will:

      Fix GE inventory item positioning bug


      Fix broken object hooks
        • Like
      • 21 replies
    • This release will:

      Fix some ClosedChannelException bug


      Fix bug in RSObject#getAllTiles


      Add game tab support for "Kourend Favour"
        • Like
      • 15 replies
    • This release will:

      Fix Settings UI placement bug


      Fix game object location bug


      Fix small layout bug making the client shift up and down


      Fix client crashing bug where loading the client with a small display area will cause the client to crash


      Fix annoying Linux bug relating to painting events and peers


      Fix settings saving bug where settings are saved to disk more often than they should


      Fix RSInterface#isBeingDrawn bug affecting a limited amount of people


      Drop Java 1.7 bytecode version for 1.8


      Important: Since the downloadable RS client uses Java 7, it will no longer be compatible with Looking Glass. To make up for this, we will add support for using other clients such as RuneLite (at a later date).


      This change was necessary to allow us to use Java 8 syntax. It also paves the way for Java 9/10/11 support.
        • Like
      • 40 replies
    • This update will:

      Fix the RSMenuNode bug which also fixes the bug with bank opening


      Fix the incorrect object positions bug


      Fix and re-enable the LG Objects API Accelerator


      Fix the RSObject#getAllTiles bug
        • Like
      • 22 replies
    • Try our development release by checking "Development Release" on the TRiBot Loader. Note that these new features are currently in beta.

      This release features:

      Re-sizable mode support for both LG and the regular client


      Slightly improved login bot


      Removed final access modifiers from API classes


      Added RSServer hook wrapper to get the client's cached list of server/world info


      [NEW] Bug fix for intelligent banking


      [NEW] Improvement to the stability of LG over time


      [NEW] Vastly improved the reliability and speed of Screen#getColorAt on both LG and the regular client


      [NEW] Fix LG login problems


      [NEW] Fixed re-sizable mode container bug


      [NEW] Fixed re-sizable mode mouse bug


      [NEW] Use of public constants in the Banking API


      [NEW] Use of other various constants such as Projection#NULL_PT and Screen#EMPTY_COLOR



      More features to come very soon!

      Please test it and let us know here if there are any new bugs introduced in this release.
        • Thanks
        • Like
      • 12 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×